[May 2018] 2018 Latest Updated 70-411 Dumps Free Download In Lead2pass 449q

2018 Microsoft 70-411 Dumps Free Download 100% Pass Promised By Lead2pass:

https://www.lead2pass.com/70-411.html

QUESTION 51
You have a server named Server 1.
You enable BitLocker Drive Encryption (BitLocker) on Server 1.
You need to change the password for the Trusted Platform Module (TPM) chip.
What should you run on Server1?

A.    Manage-bde.exe
B.    Set-TpmOwnerAuth
C.    bdehdcfg.exe
D.    tpmvscmgr.exe

Answer: B
Explanation:
The Set-TpmOwnerAuthcmdlet changes the current owner authorization value of the Trusted Platform Module (TPM) to a new value.
You can specify the current owner authorization value or specify a file that contains the current owner authorization value. If you do not specify an owner authorization value, the cmdlet attempts to read the value from the registry.
Use the ConvertTo-TpmOwnerAuthcmdlet to create an owner authorization value.
You can specify a new owner authorization value or specify a file that contains the new value.

QUESTION 52
Your company has a main office and two branch offices. The main office is located in Seattle.
The two branch offices are located in Montreal and Miami.
Each office is configured as an Active Directory site.
The network contains an Active Directory domain named contoso.com.
Network traffic is not routed between the Montreal office and the Miami office.
You implement a Distributed File System (DFS) namespace named \\contoso.com\public.
The namespace contains a folder named Folder1. Folder1 has a folder target in each office.
You need to configure DFS to ensure that users in the branch offices only receive referrals to the target in their respective office or to the target in the main office.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    Set the Ordering method of \\contoso.com\public to Random order.
B.    Set the Advanced properties of the folder target in the Seattle office to Last among all targets.
C.    Set the Advanced properties of the folder target in the Seattle office to First among targets of equal cost.
D.    Set the Ordering method of \\contoso.com\public to Exclude targets outside of the client’s site.
E.    Set the Advanced properties of the folder target in the Seattle office to Last among targets of equal cost.
F.    Set the Ordering method of \\contoso.com\public to Lowest cost.

Answer: BD
Explanation:
If you want to prevent branch clients from failing over to a branch server at a different branch site, select the Exclude targets outside of the client site ordering method for each folder with targets, and then set target priority on each hub server’s folder target by selecting the Last among all targets target priority. The result of selecting these two options is as follows:
The Exclude targets outside of the client site setting ensures that only targets within the client’s site will be included in referrals.
The Last among all targets setting overrides the referral ordering method by including the hub server in the referral, even if the hub server is not in the client’s site. (If multiple hub servers are used as folder targets for a given folder, those hub servers will appear last in the referral and be sorted in order of lowest cost after the other targets.)
https://technet.microsoft.com/en-us/library/cc772778%28v=ws.10%29.aspx

QUESTION 53
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Network Policy Server server role installed. The domain contains a server named Server2 that is configured for RADIUS accounting.
Server1 is configured as a VPN server and is configured to forward authentication requests to Server2.
You need to ensure that only Server2 contains event information about authentication requests from connections to Server1.

Which two nodes should you configure from the Network Policy Server console?
To answer, select the appropriate two nodes in the answer area.

531

Answer:

532

Explanation:
In the properties of the Network Policy Server logging of rejected and successful authentication requests can be disabled: Using connection request policies can be defined, whether connection requests are processed locally or forwarded to a remote RADIUS server.

QUESTION 54
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. An organizational unit (OU) named OU1 contains 200 client computers that run Windows 8 Enterprise. A Group Policy object (GPO) named GPO1 is linked to OU1.
You make a change to GPO1.
You need to force all of the computers in OU1 to refresh their Group Policy settings immediately.
The solution must minimize administrative effort.
Which tool should you use?

A.    Group Policy Object Editor
B.    The Secedit command
C.    Group Policy Management Console (GPMC)
D.    Active Directory Users and Computers

Answer: C
Explanation:
In the previous versions of Windows, this was accomplished by having the user run GPUpdate.exe on their computer.
Starting with Windows Server?2012 and Windows?8, you can now remotely refresh Group Policy settings for all computers in an OU from one central location through the Group Policy Management Console (GPMC). Or you can use the Invoke-GPUpdate cmdlet to refresh Group Policy for a set of computers, not limited to the OU structure, for example, if the computers are located in the default computers container.
Note: Group Policy Management Console (GPMC) is a scriptable Microsoft Management Console (MMC) snap-in, providing a single administrative tool for managing Group Policy across the enterprise. GPMC is the standard tool for managing Group Policy.
Incorrect:
Not B: Secedit configures and analyzes system security by comparing your current configuration to at least one template.
Reference: Force a Remote Group Policy Refresh (GPUpdate)

QUESTION 55
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the following BitLocker Drive Encryption (BitLocker) settings:

551

You need to ensure that drive D will unlock automatically when Server1 restarts. What command should you run?
To answer, select the appropriate options in the answer area.

552

Answer:

553
Explanation:
If BitLocker is enabled on the operating system drive, you can admit when you turn on BitLocker for an integrated data drive that the drive is automatically unlocked when the operating system drive is unlocked.
The available parameters are part of the cmdlet Add-BitLockerKeyProtector.
The parameter -ADAccountOrGroupProtector the encryption key can be added to a domain account as a protector.

QUESTION 56
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. All servers run Windows Server 2012 R2.
You need to collect the error events from all of the servers on Server1. The solution must ensure that when new servers are added to the domain, their error events are collected automatically on Server1.
Which two actions should you perform?
(Each correct answer presents part of the solution.
Choose two.)

A.    On Server1, create a collector initiated subscription.
B.    On Server1, create a source computer initiated subscription.
C.    From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
D.    From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.

Answer: BC
Explanation:
To set up a Source-Initiated Subscription with Windows Server 2003/2008 so that events of interest from the Security event log of several domain controllers can be forwarded to an administrative workstation
* Group Policy
The forwarding computer needs to be configured with the address of the server to which the events are forwarded. This can be done with the following group policy setting:
Computer configuration-Administrative templates-Windows components-Event forwarding-
Configure the server address, refresh interval, and issue certificate authority of a target subscription manager.
* Edit the GPO and browse to Computer Configuration | Policies | Administrative Templates
| Windows Components | Event Forwarding – Configure the server address, refresh interval, and issuer certificate authority of a target Subscription Manager

QUESTION 57
Hotspot Question
Your company has two offices. The offices are located in Montreal and Seattle.
The network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2. Server1 is located in the Seattle office. Server2 is located in the Montreal office. Both servers run Windows Server 2012 R2 and have the Windows Server Update Services (WSUS) server role installed.
You need to configure Server2 to download updates that are approved on Server1 only.
What cmdlet should you run?
To answer, select the appropriate options in the answer area.

571

Answer:

572

Explanation:
With the cmdlet Set-WsusServerSynchronization can be determined whether a Windows Server Update Services (WSUS) server updates synchronized from Microsoft Update or from an upstream server.
The parameter -UssServerName server name indicates that you want to synchronize from the specified upstream server.
The Parameter -Replica configures the Windows Server Update Services (WSUS) for the replica mode.

QUESTION 58
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has the File Server Resource Manager role service installed.
Each time a user receives an access-denied message after attempting to access a folder on Server1, an email notification is sent to a distribution list named DL1.
You create a folder named Folder1 on Server1, and then you configure custom NTFS permissions for Folder 1.
You need to ensure that when a user receives an access-denied message while attempting to access Folder1, an email notification is sent to a distribution list named DL2.
The solution must not prevent DL1 from receiving notifications about other access-denied messages.
What should you do?

A.    From File Explorer, modify the Classification tab of Folder1.
B.    From the File Server Resource Manager console, modify the Email Notifications settings.
C.    From the File Server Resource Manager console, set a folder management property.
D.    From File Explorer, modify the Customize tab of Folder1.

Answer: C
Explanation:
Since the is no SMB Share – Advanced option, the other option is to edit folder management properties.
https://social.technet.microsoft.com/Forums/office/en-US/dc0dc85c-467d-4d7a-a881-f513157e9331/please-help-me-about-this-question?forum=winservergen
Also check this:
“When using the email model each of the file shares, you can determine whether access requests to each file share will be received by the administrator, a distribution list that represents the file share owners, or both.
The owner distribution list is configured by using the SMB Share – Advanced file share profile in the New Share Wizard in Server Manager.
You can also use the File Server Resource Manager console to configure the owner distribution list by editing the management properties of the classification properties.”
https://technet.microsoft.com/en-us/library/jj574182.aspx#BKMK_12

70-411 dumps full version (PDF&VCE): https://www.lead2pass.com/70-411.html

Large amount of free 70-411 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSmRhaVRWcW5Cc1k

You may also need:

70-410 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDcXAzcDVNOWI1blU

70-412 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDcDUzczlzc2N6RkU

70-413 exam dumps: https://drive.google.com/open?id=1b83z5KIZUL3VTF7QfvaVypTlHDaUnZIE

70-414 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdzk4ajRnWG50TzA

[March 2018] 2018 New Lead2pass Microsoft 70-411 Dumps Free Download 449q

2018 New Released Microsoft 70-411 Exam Dumps Free Download In Lead2pass:

https://www.lead2pass.com/70-411.html

QUESTION 31
Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs). Currently, there are no enforced GPOs.
You need to provide an Administrator named Admin1 with the ability to create GPOs in the domain. The solution must not provide Admin1 with the ability to link GPOs.
What should you use?

A.    dcgpofix
B.    Get-GPOReport
C.    Gpfixup
D.    Gpresult
E.    Gptedit.msc
F.    Import-GPO
G.    Restore-GPO
H.    Set-GPInheritance
I.    Set-GPLink
J.    Set-GPPermission
K.    Gpupdate
L.    Add-ADGroupMember

Answer: L
Explanation:
http://windowsitpro.com/windows/what-group-policy-creator-owners-group

QUESTION 32
Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs). Currently, there are no enforced GPOs. The domain contains a GPO named GPO1. GPO1 contains several Group Policy preferences.
You need to view all of the preferences configured in GPO1.
What should you use?

A.    dcgpofix
B.    Get-GPOReport
C.    Gpfixup
D.    Gpresult
E.    Gptedit.msc
F.    Import-GPO
G.    Restore-GPO
H.    Set-GPInheritance
I.    Set-GPLink
J.    Set-GPPermission
K.    Gpupdate
L.    Add-ADGroupMember

Answer: B
Explanation:
The Get-GPOReport cmdlet generates a report in either XML or HTML format that describes properties and policy settings for a specified GPO or for all GPOs in a domain. The information that is reported for each GPO includes: details, links, security filtering, WMI filtering, delegation, and computer and user configuration
http://technet.microsoft.com/en-us/library/ee461027.aspx http://cmdlet.wordpress.com/2011/08/24/episode-3-get-gporeport

QUESTION 33
Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs). Currently, there are no enforced GPOs.
A network Administrator accidentally deletes the Default Domain Policy GPO.
You do not have a backup of any of the GPOs.
You need to recreate the Default Domain Policy GPO.
What should you use?

A.    dcgpofix
B.    Get-GPOReport
C.    Gpfixup
D.    Gptedit.msc
E.    Import-GPO
F.    Restore-GPO
G.    Set-GPInheritance
H.    Set-GPLink
I.    Set-GPPermission
J.    Gpupdate
K.    Add-ADGroupMember

Answer: A
Explanation:
Restores the default Group Policy objects to their original state (that is, the default state after initial installation).

QUESTION 34
Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs). Currently, there are no enforced GPOs. The domain is renamed to adatum.com. Group Policies no longer function correctly.
You need to ensure that the existing GPOs are applied to users and computers.
You want to achieve this goal by using the minimum amount of Administrative effort.
What should you use?

A.    dcgpofix
B.    Get-GPOReport
C.    Gpfixup
D.    Gpresult
E.    Gptedit.msc
F.    Import-GPO
G.    Restore-GPO
H.    Set-GPInheritance
I.    Set-GPLink
J.    Set-GPPermission
K.    Gpupdate
L.    Add-ADGroupMember

Answer: C
Explanation:
You can use the gpfixup command-line tool to fix the dependencies that Group Policy objects (GPOs) and Group Policy links in Active Directory Domain Services (AD DS) have on Domain Name System (DNS) and NetBIOS names after a domain rename operation.

QUESTION 35
Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs). Currently, there are no enforced GPOs.
The domain contains a top-level organizational unit (OU) for each department.
A group named Group1 contains members from each department.
You have a GPO named GPO1 that is linked to the domain.
You need to configure GPO1 to apply settings to Group1 only.
What should you use?

A.    dcgpofix
B.    Get-GPOReport
C.    Gpfixup
D.    Gpresult
E.    Gptedit.msc
F.    Import-GPO
G.    Restore-GPO
H.    Set-GPInheritance
I.    Set-GPLink
J.    Set-GPPermission
K.    Gpupdate
L.    Add-ADGroupMember

Answer: J
Explanation:
Set-GPPermission grants a level of permissions to a security principal (user, security group, or computer) for one GPO or all the GPOs in a domain. You use the TargetName and TargetType parameters to specify a user, security group, or computer for which to set the permission level.
-Replace <SwitchParameter>
Specifies that the existing permission level for the group or user is removed before the new permission level is set. If a security principal is already granted a permission level that is higher than the specified permission level and you do not use the Replace parameter, no change is made.
http://technet.microsoft.com/en-us/library/ee461038.aspx

QUESTION 36
Your network contains an Active Directory domain named contoso.com.
A user named User1 creates a central store and opens the Group Policy Management Editor as shown in the exhibit.

361

You need to ensure that the default Administrative Templates appear in GPO1.
What should you do?

A.    Link a WMI filter to GPO1.
B.    Add User1 to the Group Policy Creator Owners group.
C.    Configure Security Filtering in GPO1.
D.    Copy files from %Windir%\PolicyDefinitions to the central store.

Answer: D
Explanation:
In earlier operating systems, all the default Administrative Template files are added to the ADM folder of a Group Policy object (GPO) on a domain controller. The GPOs are stored in the SYSVOL folder. The SYSVOL folder is automatically replicated to other domain controllers in the same domain.
A policy file uses approximately 2 megabytes (MB) of hard disk space. Because each domain controller stores a distinct version of a policy, replication traffic is increased.
In Group Policy for Windows Server 2008 and Windows Vista, if you change Administrative template policy settings on local computers, Sysvol will not be automatically updated with the new .ADMX or .ADML files. This change in behavior is implemented to reduce network load and disk storage requirements, and to prevent conflicts between .ADMX files and. ADML files when edits to Administrative template policy settings are made across different locales. To make sure that any local updates are reflected in Sysvol, you must manually copy the updated .ADMX or .ADML files from the PolicyDefinitions file on the local computer to the Sysvol\PolicyDefinitions folder on the appropriate domain controller.
To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain.
To create a Central Store for .admx and .adml files, create a folder that is named PolicyDefinitions in the following location:
\\FQDN\SYSVOL\FQDN\policies
http://support.microsoft.com/kb/929841

QUESTION 37
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 P.2. Server1 has the Network Policy and Access Services server role installed.
Your company’s security policy requires that certificate-based authentication must be used by some network services.
You need to identify which Network Policy Server (NPS) authentication methods comply with the security policy.
Which two authentication methods should you identify?
(Each correct answer presents part of the solution. Choose two.)

A.    MS-CHAP
B.    PEAP-MS-CHAP v2
C.    Chap
D.    EAP-TLS
E.    MS-CHAP v2

Answer: BD
Explanation:
PEAP is similar in design to EAP-TTLS, requiring only a server-side PKI certificate to create a secure TLS tunnel to protect user authentication, and uses server- side public key certificates to authenticate the server. When you use EAP with a strong EAP type, such as TLS with smart cards or TLS with certificates, both the client and the server use certificates to verify their identities to each other.

QUESTION 38
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Windows Deployment Services server role installed.
Server1 contains two boot images and four install images.
You need to ensure that when a computer starts from PXE, the available operating system images appear in a specific order.
What should you do?

A.    Modify the properties of the boot images.
B.    Create a new image group.
C.    Modify the properties of the install images.
D.    Modify the PXE Response Policy.

Answer: C

QUESTION 39
Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012 R2.
You have a Password Settings object (PSOs) named PSO1.
You need to view the settings of PSO1.
Which tool should you use?

A.    Get-ADFineGrainedPasswordPolicy
B.    Get-ADAccountResultantPasswordReplicationPolicy
C.    Get-ADDomainControllerPasswordReplicationPolicy
D.    Get-ADDefaultDomainPasswordPolicy

Answer: A
Explanation:
A. Gets one or more Active Directory fine grained password policies.
B. Gets the resultant password replication policy for an Active Directory account.
C. Gets the members of the allowed list or denied list of a read-only domain controller’s password replication policy
D. Gets the default password policy for an Active Directory domain. http://technet.microsoft.com/en-us/library/ee617231.aspx
ttp://technet.microsoft.com/en-us/library/ee617227.aspx
http://technet.microsoft.com/en-us/library/ee617207.aspx
http://technet.microsoft.com/en-us/library/ee617244.aspx

QUESTION 40
You have a failover cluster that contains five nodes. All of the nodes run Windows Server 2012 R2. All of the nodes have BitLocker Drive Encryption (BitLocker) enabled.
You enable BitLocker on a Cluster Shared Volume (CSV).
You need to ensure that all of the cluster nodes can access the CSV.
Which cmdlet should you run next?

A.    Unblock-Tpm
B.    Add-BitLockerKeyProtector
C.    Remove-BitLockerKeyProtector
D.    Enable BitLockerAutoUnlock

Answer: B
Explanation:
Add an Active Directory Security Identifier (SID) to the CSV disk using the Cluster Name Object (CNO) The Active Directory protector is a domain security identifier (SID) based protector for protecting clustered volumes held within the Active Directory infrastructure. It can be bound to a user account, machine account or group. When an unlock request is made for a protected volume, the BitLocker service interrupts the request and uses the BitLocker protect/unprotect APIs to unlock or deny the request.
For the cluster service to selfmanage BitLocker enabled disk volumes, an administrator must add the Cluster Name Object (CNO), which is the Active Directory identity associated with the Cluster Network name, as a BitLocker protector to the target disk volumes.
Add-BitLockerKeyProtector <drive letter or CSV mount point> –
ADAccountOrGroupProtector – ADAccountOrGroup $cno

70-411 dumps full version (PDF&VCE): https://www.lead2pass.com/70-411.html

Large amount of free 70-411 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSmRhaVRWcW5Cc1k

You may also need:

70-410 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDcXAzcDVNOWI1blU

70-412 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDcDUzczlzc2N6RkU

70-413 exam dumps: https://drive.google.com/open?id=1b83z5KIZUL3VTF7QfvaVypTlHDaUnZIE

70-414 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdzk4ajRnWG50TzA

[January 2018] Easily Pass 70-411 Exam With Lead2pass New Microsoft 70-411 Brain Dumps 449q

Easily Pass 70-411 Exam With Lead2pass Updated Microsoft 70-411 Dumps:

https://www.lead2pass.com/70-411.html

QUESTION 21
Your network contains a single Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com.
All servers dynamically register their host names.
You install the new Web servers that host identical copies of your company’s intranet website. The servers are configured as shown in the following table. Continue reading

[Q1-Q8] Free Lead2pass Microsoft 70-411 Exam Questions Download

Free Share 70-411 PDF Dumps With Lead2pass Updated Exam Questions:

https://www.lead2pass.com/70-411.html

QUESTION 1
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
All client computers run Windows 8 Enterprise. DC1 contains a Group Policy object (GPO) named GPO1.
You need to deploy a VPN connection to all users.
What should you configure from Users Configuration in GPO1?

A.    Policies/Administrative Templates/Network/Network Connections
B.    Policies/Administrative Templates/Network/Windows Connect Now
C.    Preferences/Control Panel Settings/Network Options
D.    Policies/Administrative Templates/Windows Components/Windows Mobility Centre

Continue reading

[Lead2pass New] Lead2pass 70-411 Dumps PDF Free Download (381-400)

Lead2pass 2017 November New Microsoft 70-411 Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Microsoft New Released Exam 70-411 exam questions are now can be downloaded from Lead2pass! All questions and answers are the latest! 100% exam pass guarantee! Get this IT exam certification in a short time!

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 381
You work as an administrator for the company Contoso.
You administer a Windows Server 2012 R2 computer that is named Server1.
You want to create an image of Server1.
To keep the size of the image as small as possible, you want to remove the source files of all server roles that are not installed on Server1.
Which tool you are use?

A.    Ocsetup.exe
B.    ServerManagerCMD.exe
C.    ImageX.exe
D.    Dism.exe

Continue reading

[Lead2pass Official] Download Free Microsoft 70-411 Exam Questions And Answers From Lead2pass (361-380)

Lead2pass 2017 September New Microsoft 70-411 Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

70-411 dumps free share: Lead2pass presents the highest quality of 70-411 exam dump which helps candidates to pass the 70-411 exams in the first attempt.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 361
You have three Windows Server Update Services (WSUS) Servers named Server01 Server02 and Server03.
Server01 synchronizes form Microsoft Update.
You need to ensure that only Server02 and Server03 can Synchronize updates from Server01.
What should you do?

A.    Modify %ProgramFiles%\Update Services\WebServices\Serversyncgwevservice\SimpleAuth.asmx.
B.    From the Update Services console, modify the Update Source and Proxy Server options.
C.    From the Update Services console, modify the Automatic Approvals Options.
D.    Modify %ProgramFiles%\Update Services\WebServices\Serversyncgwevservice\Web.config.

Continue reading

[Lead2pass Official] Download Free Microsoft 70-411 Exam Questions And Answers From Lead2pass (341-360)

Lead2pass 2017 September New Microsoft 70-411 Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

How to pass 70-411 exam easily? Are you struggling for the 70-411 exam? Good news, Lead2pass Microsoft technical experts have collected all the questions and answers which are updated to cover the knowledge points and enhance candidates’ abilities. We offer the latest 70-411 PDF and VCE dumps with new version VCE player for free download, and the new 70-411 dump ensures your 70-411 exam 100% pass.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 341
Your network contains an Active Directory domain named contoso.com.
The domain contains a member server named Server1. Server1 has the Web Server (IIS) server role installed.
On Server1, you install a managed service account named Service1.
You attempt to configure the World Wide Web Publishing Service as shown in the exhibit.

 

You receive the following error message:

“The account name is invalid or does not exist, or the password is invalid for the account name specified.”

You need to ensure that the World Wide Web Publishing Service can log on by using the managed service account.
What should you do?

A.    Specify contoso\service1$ as the account name.
B.    Specify [email protected] as the account name.
C.    Reset the password for the account.
D.    Enter and confirm the password for the account.

Continue reading

[Lead2pass Official] Download Free Microsoft 70-411 Exam Questions And Answers From Lead2pass (321-340)

Lead2pass 2017 September New Microsoft 70-411 Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

We at Lead2pass are committed to help you clear your 70-411 certification test with high scores. The chances of you failing to clear your 70-411 test, after going through our comprehensive exam dumps is very bleak.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 321
Your network contains one Active Directory domain named contoso.com.
From the Group Policy Management console, you view the details of a Group Policy object (GPO) named GPO1.
You need to ensure that the comments field of GPO1 contains a detailed description of GPO1.
What should you do?

Continue reading

[Lead2pass Official] Download Free Microsoft 70-411 Exam Questions And Answers From Lead2pass (301-320)

Lead2pass 2017 September New Microsoft 70-411 Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Lead2pass dumps for 70-411 exam are written to the highest standards of technical accuracy, provided by our certified subject matter experts and published authors for development. We guarantee the best quality and accuracy of our products. We hope you pass the exams successfully with our practice test. With our Microsoft 70-411 dumps, you will pass your exam easily at the first attempt. You can also enjoy 365 days free update for your product.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 301
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012.
You pre-create a read-only domain controller (P.QDC) account named RODC1.
You export the settings of RODC1 to a file named Filel.txt.
You need to promote RODC1 by using File1.txt.
Which tool should you use?

A.    The Install-WindowsFeature cmdlet
B.    The Add-WindowsFeature cmdlet
C.    The Dism command
D.    The Install-ADDSDomainController cmdlet
E.    the Dcpromo command

Continue reading

[Lead2pass Official] Download Free Microsoft 70-411 Exam Questions And Answers From Lead2pass (281-300)

Lead2pass 2017 September New Microsoft 70-411 Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

There are many companies that provide 70-411 braindumps but those are not accurate and latest ones. Preparation with Lead2pass 70-411 new questions is a best way to pass this certification exam in easy way.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 281
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. All of the DNS servers in both of the domains run Windows Server 2012 R2.
The network contains two servers named Server1 and Server2. Server1 hosts an Active Directory-integrated zone for contoso.com. Server2 hosts an Active Directory-integrated zone for fabrikam.com. Server1 and Server2 connect to each other by using a WAN link.
Client computers that connect to Server1 for name resolution cannot resolve names in fabrikam.com.
You need to configure Server1 to resolve names in fabrikam.com.
The solution must NOT require that changes be made to the fabrikam.com zone on Server2.
What should you create?

A.    a secondary zone
B.    a stub zone
C.    a trust anchor
D.    a zone delegation

Answer: B
Explanation:
A stub zone is a copy of a zone that contains only those resource records necessary to identify the authoritative Domain Name System (DNS) servers for that zone. A stub zone is used to resolve names between separate DNS namespaces. This type of resolution may be necessary when a corporate merger requires that the DNS servers for two separate DNS namespaces resolve names for clients in both namespaces.

QUESTION 282
Your network contains an Active Directory domain named contoso.com.
Network Access Protection (NAP) is deployed to the domain.
You need to create NAP event trace log files on a client computer.
What should you run?

A.    Register-ObjectEvent
B.    Register-EngineEvent
C.    tracert
D.    logman

Answer: D
Explanation:
Register-ObjectEvent: Monitor events generated from .Net Framework Object. Register-EngineEvent: Subscribes to events that are generated by the Windows PowerShell engine and by the New-Event cmdlet.
http://technet.microsoft.com/en-us/library/hh849967.aspx
tracert: Trace IP route
logman: Manages and schedules performance counter and event trace log collections on a local and remote systems.
http://technet.microsoft.com/en-us/library/bb490956.aspx

QUESTION 283
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2. The domain contains two servers.
The servers are configured as shown in the following table.

 

Server1 and Server2 host a load-balanced website named Web1. Web1 runs by using an application pool named WebApp1.
WebApp1 uses a group Managed Service Account named gMSA1 as its identity.
Domain users connect to Web1 by using either the name Web1.contoso.com or the alias myweb.contoso.com.
You discover the following:

– When the users access Web1 by using Web1.contoso.com, they authenticate by using Kerberos.
– When the users access Web1 by using myweb.contoso.com, they authenticate by using NTLM.

You need to ensure that the users can authenticate by using Kerberos when they connect by using myweb.contoso.com.
What should you do?

A.    Run the Set-ADServiceAccount cmdlet.
B.    Run the New-ADServiceAccount cmdlet.
C.    Modify the properties of the WebApp1 application pool.
D.    Modify the properties of the Web1 website.

Answer: A
Explanation:
Independent managed service accounts that were introduced in Windows Server 2008 R2 and Windows 7 are managed domain accounts that provide an automatic password management and simplified management of SPN (Service Principal Names SPNs) – including delegation of management to other administrators.

The Group managed service account provides the same functions within the domain, but this also is expanding to multiple servers. When connecting with a service that is hosted in a server farm (for example, a Network Load Balancing), the authentication protocols require with mutual authentication, that all instances of services use the same principal. If group managed service accounts can be used as a service principals, the password for the account from the Windows operating system is managed, rather than leaving the password keeper the Administrator.

The Microsoft Key Distribution Service (“kdssvc.dll”) provides the mechanism for secure retrieval of current key or a certain key ready for an Active Directory account with a key ID. This service is new in Windows Server 2012 and can not run on older versions of the Windows Server operating system. From the key distribution service secret information to create keys for the account are provided. These keys are changed regularly. In one group managed service account to the Windows Server 2012 domain controller calculates the password for the key specified by the Key Distribution Service – just like any other attributes of the group managed service account. Current and older password values can be 8-member hosts accessed by contacting a Windows Server 2012 domain controller of Windows Server 2012- and Windows.

Group Managed Service Accounts provide a single identity solution for services that are running on a server farm or on systems behind a Network Load Balancing. By providing a solution for group managed service accounts (groups-MSA solution) services for the new group MSA principal can be configured, while the password manager of Windows is handled. When using a group managed service account must be managed by services or service administrators no password synchronization between service instances become. The group managed service account supported hosts that are offline for an extended period, as well as the managing member of hosts for all instances of a service.

So you can deploy a server farm that supports a single identity, with respect to the can authenticate existing client computer without knowing with which instance of the service a connection is established. It is most likely that the service account gMSA1 only the name web1.contoso contains .de as registered SPN. To ensure that Kerberos authentication works even when use of the name myweb.certbase.de, must match the service account name myweb.certbase.de be added as additional SPN. This is possible by editing the account Properties or by using the Set-ADServiceAccount.

QUESTION 284
Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012 R2.
You have a Password Settings object (PSOs) named PSO1.
You need to view the settings of PSO1.
Which tool should you use?

A.    Active Directory Administrative Center
B.    Get-ADAccountResultantPasswordReplicationPolicy
C.     Local Security Policy
D.     Get-ADDomainControllerPasswordReplicationPolicy

Answer: A
Explanation:
Up until now, PSOs were created with the ADSI Edit application or PowerShell. Now, we can use the Active Directory Administrative Center.
Note:
* Password Setting Object (PSO) is another name for Fine Grain Password Policies. These PSOs allowed us to set up a different password policy based on security group membership.
* Storing fine-grained password policies
Windows Server 2008 includes two new object classes in the Active Directory Domain Services (AD DS) schema to store fine-grained password policies:
/ Password Settings Container
/ Password Settings
The Password Settings Container (PSC) object class is created by default under the System container in the domain. It stores the Password Settings objects (PSOs) for that domain. You cannot rename, move, or delete this container.

QUESTION 285
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2. Server1 has a share named Share1.
When users without permission to Share1 attempt to access the share, they receive the Access Denied message as shown in the exhibit. (Click the Exhibit button.)

 

You deploy a new file server named Server2 that runs Windows Server 2012 R2.
You need to configure Server2 to display the same custom Access Denied message as Server1.
What should you install on Server2?

A.    The Remote Assistance feature
B.    The File Server Resource Manager role service
C.    The Enhanced Storage feature
D.    The Storage Services server role

Answer: B
Explanation:
We need to install the prerequisites for Access-Denied Assistance.
Because Access-Denied Assistance relies up on e-mail notifications, we also need to configure each relevant file server with a Simple Mail Transfer Protocol (SMTP) server address. Let’s do that quickly with Windows PowerShell:
Set-FSRMSetting -SMTPServer mailserver.nuggetlab.com -AdminEmailAddress [email protected] -FromEmailAddress [email protected]
You can enable Access-Denied Assistance either on a per-server basis or centrally via Group Policy. To my mind, the latter approach is infinitely preferable from an administration standpoint.
Create a new GPO and make sure to target the GPO at your file servers’ Active Directory computer accounts as well as those of your AD client computers. In the Group Policy Object Editor, we are looking for the following path to configure Access-Denied Assistance:
\Computer Configuration\Policies\Administrative Templates\System\Access-Denied Assistance

 

The Customize message for Access Denied errors policy, shown in the screenshot below, enables us to create the actual message box shown to users when they access a shared file to which their user account has no access.

 

What’s cool about this policy is that we can “personalize” the e-mail notifications to give us administrators (and, optionally, file owners) the details they need to resolve the permissions issue quickly and easily.
For instance, we can insert pre-defined macros to swap in the full path to the target file, the administrator e-mail address, and so forth. See this example:
Whoops! It looks like you’re having trouble accessing [Original File Path]. Please click Request Assistance to send [Admin Email] a help request e-mail message. Thanks!
You should find that your users prefer these human-readable, informative error messages to the cryptic, non-descript error dialogs they are accustomed to dealing with.
The Enable access-denied assistance on client for all file types policy should be enabled to force client computers to participate in Access-Denied Assistance. Again, you must make sure to target your GPO scope accordingly to “hit” your domain workstations as well as your Windows Server 2012 file servers.
Testing the configuration
This should come as no surprise to you, but Access-Denied Assistance works only with Windows Server 2012 and Windows 8 computers. More specifically, you must enable the Desktop Experience feature on your servers to see Access-Denied Assistance messages on server computers.
When a Windows 8 client computer attempts to open a file to which the user has no access, the custom Access-Denied Assistance message should appear:

 

If the user clicks Request Assistance in the Network Access dialog box, they see a secondary message:

 

At the end of this process, the administrator(s) will receive an e-mail message that contains the key information they need in order to resolve the access problem:
The user’s Active Directory identity
The full path to the problematic file
A user-generated explanation of the problem
So that’s it, friends! Access-Denied Assistance presents Windows systems administrators with an easy-to-manage method for more efficiently resolving user access problems on shared file system resources. Of course, the key caveat is that your file servers must run Windows Server 2012 and your client devices must run Windows 8, but other than that, this is a great technology that should save admins extra work and end-users extra headaches.
http://4sysops.com/archives/access-denied-assistance-in-windows-server-2012/

QUESTION 286
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2.
Administrators use client computers that run Windows 8 to perform all management tasks.
A central store is configured on a domain controller named DC1.
You have a custom administrative template file named App1.admx. App1.admx contains application settings for an application named Appl.
From a client computer named Computer1, you create a new Group Policy object (GPO) named GPO1.
You discover that the application settings for App1 fail to appear in GPO1.
You need to ensure that the App1 settings appear in all of the new GPOs that you create.
What should you do?

A.    Copy App1.admx to \\Contoso.com\SYSVOL\Contoso.com\Policies\PolicyDefinitions\
B.    From the Default Domain Controllers Policy, add App1.admx to the Administrative Templates.
C.    From the Default Domain Policy, add App1.admx to the Administrative Templates
D.    Copy App1.admx to \\Contoso.com\SYSVOL\Contoso.com\StarterGPOs.

Answer: A
Explanation:
To take advantage of the benefits of . admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any . admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain.

QUESTION 287
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2.
One of the domain controllers is named DC1.
The DNS zone for the contoso.com zone is Active Directory-integrated and has the default settings.
A server named Server1 is a DNS server that runs a UNIX-based operating system.
You plan to use Server1 as a secondary DNS server for the contoso.com zone.
You need to ensure that Server1 can host a secondary copy of the contoso.com zone.
What should you do?

A.    From Windows PowerShell, run the Set-DnsServerPrimaryZone cmdlet and specify the contoso.com
zone as a target.
B.    From DNS Manager, modify the Security settings of DC1
C.    From DNS Manager, modify the Zone Transfers settings of the contoso.com zone.
D.    From DNS Manager, modify the Advanced settings of DC1.

Answer: D
Explanation:
In DNS Manager open up Properties of DC1, click on the Advanced tab, and select ENABLE BIND SECONDARIES.
BIND Secondaries enables the DNS server to communicate with non-Microsoft DNS servers.
https://technet.microsoft.com/en-us/library/cc940771.aspx?f=255&MSPPError=-2147217396

QUESTION 288
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Network Policy Server role service installed.
You need to enable trace logging for Network Policy Server (NPS) on Server1.
Which tool should you use?

A.    the Network Policy Server console
B.    the Server Manager console
C.    the tracert.exe command
D.    the netsh.exe command

Answer: D
Explanation:
You can use log files on servers running Network Policy Server (NPS) and NAP client computers to help troubleshoot NAP problems. Log files can provide the detailed information required for troubleshooting complex problems.
You can capture detailed information in log files on servers running NPS by enabling remote access tracing. The Remote Access service does not need to be installed or running to use remote access tracing. When you enable tracing on a server running NPS, several log files are created in %windir%\tracing.
The following log files contain helpful information about NAP:
IASNAP.LOG: Contains detailed information about NAP processes, NPS authentication, and NPS authorization.
IASSAM.LOG: Contains detailed information about user authentication and authorization.
Membership in the local Administrators group, or equivalent, is the minimum required to enable tracing. Review details about using the appropriate accounts and group memberships at Local and Domain Default Groups
(http://go.microsoft.com/fwlink/?LinkId=83477).
To create tracing log files on a server running NPS
Open a command line as an administrator.
Type netshras set tr * en.
Reproduce the scenario that you are troubleshooting.
Type netshras set tr * dis.
Close the command prompt window.
http://technet.microsoft.com/en-us/library/dd348461%28v=ws.10%29.aspx

QUESTION 289
Hotspot Question
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains two Active Directory sites named Site1 and Site2.
You plan to deploy a read-only domain controller (RODC) named DC10 to Site2.
You pre- create the DC10 domain controller account by using Active Directory Users and Computers.
You need to identify which domain controller will be used for initial replication during the promotion of the RODC.
Which tab should you use to identify the domain controller? To answer, select the appropriate tab in the answer area.

 

Answer:

 

QUESTION 290
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed.
Server1 is configured to delete automatically the DNS records of client computers that are no longer on the network. A technician confirms that the DNS records are deleted automatically from the contoso.com zone.
You discover that the contoso.com zone has many DNS records for servers that were on the network in the past, but have not connected to the network for a long time.
You need to set the time stamp for all of the DNS records in the contoso.com zone.
What should you do?

A.    From DNS Manager, modify the Advanced settings from the properties of Server1
B.    From Windows PowerShell, run the Set-DnsServerResourceRecordAging cmdlet
C.    From DNS Manager, modify the Zone Aging/Scavenging Properties
D.    From Windows PowerShell, run the Set-DnsServerZoneAging cmdlet.

Answer: B
Explanation:
https://technet.microsoft.com/en-us/library/jj649936.aspx

QUESTION 291
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You enable and configure Routing and Remote Access (RRAS) on Server1.
You create a user account named User1.
You need to ensure that User1 can establish VPN connections to Server1.
What should you do?

A.    Modify the members of the Remote Management Users group.
B.    Add a RADIUS client.
C.    Modify the Dial-in setting of User1.
D.    Create a connection request policy.

Answer: C
Explanation:
Access permission is also granted or denied based on the dial-in properties of each user account.
http://technet.microsoft.com/en-us/library/cc772123.aspx

QUESTION 292
Your network contains an Active Directory domain named contoso.com.
All user accounts reside in an organizational unit (OU) named OU1. All of the users in the marketing department are members of a group named Marketing. All of the users in the human resources department are members of a group named HR.
You create a Group Policy object (GPO) named GPO1.
You link GPO1 to OU1. You configure the Group Policy preferences of GPO1 to add two shortcuts named Link1 and Link2 to the desktop of each user.
You need to ensure that Link1 only appears on the desktop of the users in Marketing and that Link2 only appears on the desktop of the users in HR.
What should you configure?

A.    Security Filtering
B.    WMI Filtering
C.    Group Policy Inheritance
D.    Item-level targeting

Answer: D
Explanation:
You can use item-level targeting to change the scope of individual preference items, so they apply only to selected users or computers. Within a single Group Policy object (GPO), you can include multiple preference items, each customized for selected users or computers and each targeted to apply settings only to the relevant users or computers.
http://technet.microsoft.com/en-us/library/cc733022.aspx

QUESTION 293
Your network contains a single Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2.
The domain contains 400 desktop computers that run Windows 8 and 10 desktop computers that run Windows XP Service Pack 3 (SP3).
All new desktop computers that are added to the domain run Windows 8.
All of the desktop computers are located in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1.
GPO1 contains startup script settings. You link GPO1 to OU1.
You need to ensure that GPO1 is applied only to computers that run Windows XP SP3.
What should you do?

A.    Create and link a WML filter to GPO1
B.    Run the Set-GPInheritance cmdlet and specify the -target parameter.
C.    Run the Set-GPLink cmdlet and specify the -target parameter.
D.    Modify the Security settings of OU1.

Answer: A
Explanation:
WMI Filtering is used to get information of the system and apply the GPO on it with the condition is met. Security filtering: apply a GPO to a specific group (members of the group)

QUESTION 294
Your network contains an Active Directory domain named contoso.com.
Network Policy Server (NPS) is deployed to the domain.
You plan to deploy Network Access Protection (NAP).
You need to configure the requirements that are validated on the NPS client computers.
What should you do?

A.    From the Network Policy Server console, configure a network policy.
B.    From the Network Policy Server console, configure a health policy.
C.    From the Network Policy Server console, configure a Windows Security Health Validator
(WSHV) policy.
D.    From a Group Policy object (GPO), configure the NAP Client Configuration security setting.
E.    From a Group Policy object (GPO), configure the Network Access Protection Administrative
Templates setting.

Answer: C
Explanation:
The settings of the Windows Security Health verification. The client computer requirements are defined, of which a connection to your network is established Windows Security Health Checks can Windows be created 7 and Windows Vista for Windows XP or for Windows 8. Guidelines for Windows XP does not support testing of Antispywarefuntkionen.

 

QUESTION 295
Your network contains an Active Directory domain named adatum.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 is configured as a Network Policy Server (NPS) server and as a DHCP server.
The network contains two subnets named Subnet1 and Subnet2.
Server1 has a DHCP scope for each subnet.
You need to ensure that noncompliant computers on Subnet1 receive different network policies than noncompliant computers on Subnet2.
Which two settings should you configure? (Each correct answer presents part of the solution. Choose two.)

A.    The NAP-Capable Computers conditions
B.    The NAS Port Type constraints
C.    The Health Policies conditions
D.    The MS-Service Class conditions
E.    The Called Station ID constraints

Answer: CD
Explanation:
The network contains two subnets named Subnet1 and Subnet2. Server1 has a DHCP
scope for each subnet.
The MS-Service Class conditions can be used to identify DHCP scope, i.e subnet,
The MS-Service Class = DHCP > Network access protection tab > Use custom profile > Profile Name
You need to create health policy :
Noncompliant health policy for NonCompliant computers.
At first, you need to create health policy for noncompliant computers :
Right-click Health Policies, and then click New.
On the Create New Health Policy dialog box, under Policy Name, type Noncompliant.
Under Client SHV checks, select Client fails one or more SHV checks.
Under SHVs used in this health policy, select the Windows Security Health Validator check box, and then click OK.
More info : https://technet.microsoft.com/en-us/library/dd441008.aspx
Than you can create two network policies based on those two health policies and MS-Service Class conditions
Network policy 1 = MS-Service Class (Profile name) for subnet1 + Health policy for NonCompliant computers.
Network policy 2 = MS-Service Class (Profile name) for subnet2 + Health policy for NonCompliant computers.
Network policy :
Network policy > Conditions tab > Health policy condition + MS-service class condition.
In the NPS management console, in the tree, right-click Network Policies, and then click New.
In the Specify Network Policy Name and Connection Type window, in the Policy name box, type Noncompliant, and then click Next.
In the Specify Conditions window, click Add.
On the Select condition dialog box, double-click Health Polices.
On the Health Policies dialog box, under Health policies, select Noncompliant, and then click OK.
In the Specify Conditions window, under Conditions, verify that Health Policy is specified with a value of Noncompliant, and then click Next.
If you want to configure the MS-Service Class condition, click MS-Service Class, and then click Add. In Specify the profile name that identifies your DHCP scope,
type the name of an existing DHCP profile, and then click Add.

QUESTION 296
Your network contains an Active Directory domain named contoso.com.
The functional level of the forest is Windows Server 2008 R2.
Computer accounts for the marketing department are in an organizational unit (OU) named Departments\Marketing\Computers.
User accounts for the marketing department are in an OU named Departments\Marketing\Users.
All of the marketing user accounts are members of a global security group named MarketingUsers. All of the marketing computer accounts are members of a global security group named MarketingComputers.
In the domain, you have Group Policy objects (GPOs) as shown in the exhibit. (Click the Exhibit button.)

 

You create two Password Settings objects named PSO1 and PSO2.
PSO1 is applied to MarketingUsers. PSO2 is applied to MarketingComputers.
The minimum password length is defined for each policy as shown in the following table.
 

You need to identify the minimum password length required for each marketing user.
What should you identify?

A.    5
B.    6
C.    7
D.    10
E.    12

Answer: D

QUESTION 297
Your network contains an Active Directory domain named adatum.com.
You need to audit changes to the files in the SYSVOL shares on all of the domain controllers.
The solution must minimize the amount of SYSVOL replication traffic caused by the audit.
Which two settings should you configure? (Each correct answer presents part of the solution. Choose two.)

A.    Audit Policy\Audit system events
B.    Advanced Audit Policy Configuration\DS Access
C.    Advanced Audit Policy Configuration\Global Object Access Auditing
D.     Audit Policy\Audit object access
E.     Audit Policy\Audit directory service access
F.     Advanced Audit Policy Configuration\Object Access

Answer: DF
Explanation:
Here object access must be monitored on the share \\contoso.local\ ysvol. This is possible on general audit policy and the Advanced Audit Policy Configuration.
The nine basic audit policies under Computer Configuration \ Policies \ Windows Settings \ Security Settings \ Local Policies \ Audit Policy allow you to configure security monitoring policy settings for various behavior of which generate some much more audit events than others.
An administrator must review all generated events, regardless of whether they are of interest or not. Starting with Windows Server 2008 R2 and Windows 7 can monitor the client behavior on the computer or on the network targeted administrators, so that it is easier for them to abnormalities faster identify.
For example, there are under Computer Configuration \ Policies \ Windows Settings \ Security Settings \ Local Policies \ Audit Policy only one policy setting for logon events: Audit logon events.
Under Computer Configuration \ Policies \ Windows Settings \ Security Settings \ Advanced Audit Policy Configuration \ System Audit Policies, you can instead select the category logon / logoff eight different policy settings.
In this way you can control the aspects of logon and logoff you can track precisely.

QUESTION 298
Your network contains multiple Active Directory sites.
You have a Distributed File System (DFS) namespace that has a folder target in each site.
You discover that some client computers connect to DFS targets in other sites.
You need to ensure that the client computers only connect to a DFS target in their respective site.
What should you modify?

A.    The properties of the Active Directory sites
B.    The properties of the Active Directory site links
C.    The delegation settings of the namespace
D.    The referral settings of the namespace

Answer: D
Explanation:
When a user accesses a namespace root or DFS folder with targets, the client computer receives an ordered list of servers or locations. This list is called a reference. Upon receipt of the reference to the computer attempts to access the first server in the list. If the server is not available, an attempt is made by the client computer to access the next server.
If a server is unavailable, you can configure clients to fail back to the preferred server is running, as soon as it is available again. By default, targets are set within the client’s site on the first digits of the sorted list.
Then, the following entries for servers in other locations, which can be arranged by different sorting methods If only the folder targets are approved within the client site, the sorting method can exclude targets outside of the client site to be selected.
The figure illustrates the configuration options:

 

http://www.windowsnetworking.com/articles_tutorials/Configuring-DFS-Namespaces.html

QUESTION 299
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that runs Windows Server 2012.
You have a Group Policy object (GPO) named GPO1 that contains several custom Administrative templates.
You need to filter the GPO to display only settings that will be removed from the registry when the GPO falls out of scope. The solution must only display settings that are either enabled or disabled and that have a comment.
How should you configure the filter? To answer, select the appropriate options below. Select three.

 

A.    Set Managed to: Yes
B.    Set Managed to: No
C.    Set Managed to: Any
D.    Set Configured to: Yes
E.    Set Configured to: No
F.    Set Configured to: Any
G.    Set Commented to: Yes
H.    Set Commented to: No
I.    Set Commented to: Any

Answer: ADG
Explanation:
“I change the Set Configured to: any to yes”
(Only configured have the choice enabled or disabled)

QUESTION 300
Your network contains an Active Directory domain named adatum.com.
The domain contains five servers. The servers are configured as shown in the following table.

 

All desktop computers in adatum.com run Windows 8 and are configured to use BitLocker Drive Encryption (BitLocker) on all local disk drives.
You need to deploy the Network Unlock feature.
The solution must minimize the number of features and server roles installed on the network.
To which server should you deploy the feature?

A.    Server3
B.    Server1
C.    DC2
D.    Server2
E.    DC1

Answer: B
Explanation:
The BitLocker-NetworkUnlock feature must be installed on a Windows Deployment Server (which does not have to be configured–the WDSServer service just needs to be running).

More free Lead2pass 70-411 exam new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSmRhaVRWcW5Cc1k

We give you the proper and complete training with free 70-411 Lead2pass updates. Our braindumps will defiantly make you perfect to that level you can easily pass the exam in first attempt.

2017 Microsoft 70-411 (All 449 Q&As) exam dumps (PDF&VCE) from Lead2pass:

https://www.lead2pass.com/70-411.html [100% Exam Pass Guaranteed]

[Lead2pass Official] Download Free Microsoft 70-411 Exam Questions And Answers From Lead2pass (261-280)

Lead2pass 2017 September New Microsoft 70-411 Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

There are many companies that provide 70-411 braindumps but those are not accurate and latest ones. Preparation with Lead2pass 70-411 new questions is a best way to pass this certification exam in easy way.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 261
You wants to change the memory of a virtual machine that is currently powered up.
What does he need to do?

A.    Shut down the virtual machine, use the virtual machine’s settings to change the memory, and start it again.
B.    Use the virtual machine’s settings to change the memory
C.    Pause the virtual machine, use the virtual machine’s settings to change the memory, and resume it.
D.    Save the virtual machine, use the virtual machine’s settings to change the memory, and resume it.

Continue reading

[2017 PDF&VCE] 100% New Updated 70-411 New Questions Lead2pass Helps Pass 70-411 Exam Successfully (241-260)

Lead2pass 2017 September New Microsoft 70-411 Exam Dumps

100% Free Download! 100% Pass Guaranteed!

I have already passed Microsoft 70-411 certification exam today! Scored 989/1000 in Australia. SO MANY new added exam questions which made me headache….. Anyway, I finally passed 70-411 exam with the help of Lead2pass! 

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-411.html

QUESTION 241
You have a DNS server named Server1 that runs Windows Server 2012 R2. On Server1, you create a DNS zone named contoso.com.
You need to specify the email address of the person responsible for the zone.
Which type of DNS record should you configure?

A.    Start of authority (SOA)
B.    Mail exchanger (MX)
C.    Host information (HINFO)
D.    Mailbox (MB)

Continue reading