This page was exported from Free Download Lead2pass VCE And PDF Dumps [ https://www.pass4sureshared.com ] Export date:Sun Apr 28 5:12:32 2024 / +0000 GMT ___________________________________________________ Title: [Full Version] Lead2pass New Updated 70-743 Braindump Free Get (1-10) --------------------------------------------------- 2017 March Microsoft Official New Released 70-743 Dumps in Lead2pass.com! 100% Free Download! 100% Pass Guaranteed! How to pass 70-743 exam easily? Are you struggling for the 70-743 exam? Good news, Lead2pass Microsoft technical experts have collected all the questions and answers which are updated to cover the knowledge points and enhance candidates' abilities. We offer the latest 70-743 PDF and VCE dumps with new version VCE player for free download, and the new 70-743 dump ensures your 70-743 exam 100% pass. Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-743.html QUESTION 1Hotspot QuestionYou have a server named Served that runs Windows Server 2016.Server1 has the Windows Application Proxy role service installed.You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. Answer:Explanation:Publish an Integrated Windows authenticated-based Application for Web Browser ClientsStep 1: (configure the Backend server SPN – see first bulleted item below)Before you begin, make sure that you have done the following:* Made sure that the Web Application Proxy servers are configured for delegation to the service principal names (SPN) of the backend servers.* Created a non-claims-aware relying party trust for the application in the AD FS Management console.* Configured the backend server to support Kerberos constrained delegation on the domain controller or by using the Set-ADUser cmdlet with the -PrincipalsAllowedToDelegateToAccount parameter. Note that if the backend server is running on Windows Server 2012 R2 or Windows Server 2012, you can also run this PowerShell command on the backend server.* Verified that a certificate on the Web Application Proxy server is suitable for the application you want to publish. Step 2: http//server2.contoso.com/publish/app1Use the same URL as the backend server URL.Web Application Proxy can translate host names in URLs, but cannot translate path names. Therefore, you can enter different host names, but you must enter the same path name. For example, you can enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of http://app-server/app1/. However, you cannot enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of https://apps.contoso.com/internal-app1/. References: https://technet.microsoft.com/en-us/library/dn383640(v=ws.11).aspx QUESTION 2Your network contains three Hyper-V hosts.You add all of the hosts to a cluster.You need to create highly available storage spaces that connect to directly attached storage on the hosts.Which cmdlet should you use? A.    Enable-Cluster Storage Spaces DiredB.    Set-Storage PoolC.    Add-Cluster DiskD.    Update-Cluster Virtual Machine Configuration Answer: AExplanation:The Enable-ClusterStorageSpacesDirect cmdlet enables highly available Storage Spaces that use directly attached storage Storage Spaces Direct (S2D) on a cluster. QUESTION 3Drag and Drop QuestionYou have a server named Server1 that runs Windows Server 2016.You need to deploy the first node cluster of a Network Controller cluster.Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order. Answer: Explanation:Deploy Network Controller using Windows PowerShellStep 1: Install-WindowsFeatureInstall the Network Controller server roleTo install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER.Install-WindowsFeature -Name NetworkController -IncludeManagementTools Step 2: New-NetworkControllerNodeObjectYou can create a Network Controller cluster by creating a node object and then configuring the cluster.You need to create a node object for each computer or VM that is a member of the Network Controller cluster.To create a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.New-NetworkControllerNodeObject -Name <string> -Server <String> -FaultDomain <string>-RestInte Step 3: Install-NetworkControllerClusterTo configure the cluster, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.Install-NetworkControllerCluster -Node <NetworkControllerNode[]> -ClusterAuthentication … Step 4: Install-NetworkControllerTo configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.Install-NetworkController -Node <NetworkControllerNode[]> -ClientAuthentication References: https://technet.microsoft.com/en-us/library/mt282165.aspx QUESTION 4You have an application named App1.App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.What should you include in the environment? A.    Network Controller and Windows Server Network Load Balancing (NLB) nodesB.    Network Controller and Windows Server Software Load Balancing (SLB) nodesC.    an RAS Gateway and Windows Server Network Load Balancing (NLB) nodesD.    an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes Answer: D QUESTION 5Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016.All of the offices are connected by high speed, low latency WAN links.You need to ensure that you can use QoS policies for Live Migration traffic between the offices.Which component should you install? A.    the Multipath I/O featureB.    the Routing role serviceC.    the Network Controller server roleD.    the Canary Network Diagnostics featureE.    the Data Center Bridging feature Answer: CE QUESTION 6Hotspot QuestionYou have an Active Directory domain named Contoso com.The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.You have four virtual machines that are connected to an external switch.The virtual machines are configured as shown.To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer areaAnswer: Explanation:The GRE keys must match.To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.References: https://networkheresy.com/2011/10/03/nvgre-vlxan-and-what-microsoft-is-doing-right/ QUESTION 7You have a server named Server1 that runs Windows Server 2016.Server1 is a Hyper-V host that hosts a virtual machine named VM1.Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.You configure NIC Teaming on VM1 as shown in the exhibit. You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1.What should you do? A.    From Hyper-V Manager on Server1, modify the settings of VM1.B.    From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.C.    From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.D.    From the properties of the NIC team on VM1. change the load balancing of the NIC team. Answer: A QUESTION 8Hotspot QuestionYou have a machine named VM1 that runs Windows Server 2016 VM1 is a Remote Desktop Services (RDS) server.You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network. Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area. Answer: QUESTION 9Hotspot QuestionYou have a server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host. You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA) - capable.You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.Which command should you run first? To answer, select the appropriate options in the answer area. Answer: Explanation:Create a Hyper-V Virtual Switch with SET and RDMA vNICsTo make use of RDMA capabilies on Hyper-V host virtual network adapters (vNICs) on a Hyper-V Virtual Switch that supports RDMA teaming, you can use this example Windows PowerShell script.## Create a vmSwitch with SET#New-VMSwitch -Name SETswitch -NetAdapterName "SLOT 2","SLOT 3" -EnableEmbeddedTeaming $true## Add host vNICs and make them RDMA capable#Etc.Note: As New-VmSwitch is not an alternative, we choose the Add-VMSwitch command instead. Thee Add-VmSwitch command does not have -NetAdapter and -EnableEmbeddedTeaming parameters. QUESTION 10You have a server named Server1 that runs Windows Server 2016.You need to configure Server1 as a multitenant RAS Gateway.What should you install on Server1? A.    the Network Policy and Access Services server roleB.    the Remote Access server roleC.    the Data Center Bridging featureD.    the Network Controller server role Answer: B Lead2pass Microsoft 70-743 exam dumps are audited by our certified subject matter experts and published authors for development. Lead2pass Microsoft 70-743 exam dumps are one of the highest quality Microsoft 70-743 Q&As in the world. It covers nearly 96% real questions and answers, including the entire testing scope. Lead2pass guarantees you pass Microsoft 70-743 exam at first attempt. Microsoft 70-743 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDWGpUeXZ3ZE9ZX3c 2017 Microsoft 70-743 exam dumps (All 97 Q&As) from Lead2pass: http://www.lead2pass.com/70-743.html [100% Exam Pass Guaranteed] --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2017-03-17 01:46:01 Post date GMT: 2017-03-17 01:46:01 Post modified date: 2017-03-17 01:46:01 Post modified date GMT: 2017-03-17 01:46:01 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com