[May 2018] Lead2pass Cisco 400-101 Latest Exam Dumps Download 1197q

Lead2pass 400-101 Exam Questions Free Download:

https://www.lead2pass.com/400-101.html

QUESTION 41
Which three of the following security controls would you take into consideration when implementing loT capabities? (Choose three.)

A.    Layered Security Appoach.
B.    Place security above functionality.
C.    Define lifecycle controls for loT devices.
D.    Privacy impact Assessment.
E.    Change passwords every 90 days.
F.    Implement Intrusion Detection Systems on loT devices.

Answer: ADE

QUESTION 42
Which EIGRP feature allows the use of leak maps?

A.    offset-list
B.    neighbor
C.    address-family
D.    stub

Answer: D

QUESTION 43
Refer to the exhibit. Which IPv6 OSPF network type is applied to interface Fa0/0 of R2 by default?

431

A.    broadcast
B.    Ethernet
C.    multipoint
D.    point-to-point

Answer: A

QUESTION 44
Which option describes the characteristics of a public Infrastructure as a Serveice cloud service model?

A.    It is a way of delivering cloud-computing infrastructure (servers, storage, network, and operating systems) as an on-demand service.
B.    It is a cloud service where the underlying hardware is managed by the cloud service provider.
C.    It is a cloud-computing platform that facilitates the creation of web applications without the need to maintain the supporting software applications.
D.    It is a cloud-computing platform that facilitates the creation of web applications without the need to maintain the supporting software operating systems.

Answer: A

QUESTION 45
Which effect of configuring the passive-interface S0/0 command under the EIGRP routing process is true?

A.    It prevents EIGRP neighbor relationships from being formed over interface S0/0.
B.    It configures interface S0/0 to send hello packets with the passive-interface bit set.
C.    It configures interface S0/0 to suppress all outgoing routing updates.
D.    It configures interface S0/0 to reject all incoming routing updates.

Answer: A

QUESTION 46
What is the default IS-IS interface metric on a Cisco router?

A.    255
B.    64
C.    10
D.    128

Answer: C

QUESTION 47
Which two items must be defined to capture packet data with the Embedded Packet Capture feature? (Choose two.)

A.    the capture rate
B.    the capture point
C.    the capture buffer
D.    the buffer memory size
E.    the capture filter
F.    the capture file export location

Answer: BC

QUESTION 48
When you configure an IPv6 IPsec tunnel, which two fields can represent the ISAKMP identity of a peer? (Choose two)

A.    Authentication method
B.    DH group identifier
C.    Hostname
D.    IPv6 address
E.    Encryption algorithm

Answer: CD

QUESTION 49
Which action enables passive interfaces in RIPv6(RIPng)?

A.    Use “passive-interface default” under the routing process.
B.    Enable passive-interface on interface configuration.
C.    passive interface are not supported in RIPng.
D.    Enable passive-interface for each interface under the routing process.

Answer: C

QUESTION 50
Which statement is true about IGMP?

A.    Multicast sources send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
B.    Multicast receivers send IGMP messages to their first-hop router, which then forwards the IGMP messages to the RP.
C.    IGMP messages are encapsulated in PIM register messages and sent to the RP.
D.    Multicast receivers send IGMP messages to signal their interest to receive traffic for specific multicast groups.

Answer: D

400-101 dumps full version (PDF&VCE): https://www.lead2pass.com/400-101.html

Large amount of free 400-101 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDZ0lrZUFjNWtFYlk

[May 2018] Lead2pass 2018 New Cisco 400-051 Braindump Free Download 534q

Lead2pass 400-051 Exam Questions Guarantee 400-051 Certification Exam 100% Success:

https://www.lead2pass.com/400-051.html

QUESTION 41
Which two statements are requirements regarding hunt group options for B-ACD implementation on Cisco Unified Communications Manager Express routers? (Choose two.)

A.    The ephone hunt group is mandatory.
B.    Either the ephone hunt group or the voice hunt group is acceptable.
C.    Hunt group members must be SCCP IP phones.
D.    Hunt group members can include both SCCP or SIP IP phones.
E.    Hunt group members must be SIP IP phones.
F.    The member hunting mechanism must be set to sequential.

Answer: AC
Explanation:
The ephone hunt group is mandatory, and while ephone hunt groups only support Cisco Unified SCCP IP phones, a voice hunt group supports either a Cisco Unified SCCP IP phone or a Cisco Unified SIP IP phone
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_v1ht.html

QUESTION 42
Which call hunt mechanism is only supported by the voice hunt group in a Cisco Unified Communications Manager Express router?

A.    sequential
B.    peer
C.    longest idle
D.    parallel
E.    overlay

Answer: D
Explanation:
Parallel Hunt-Group, allows a user to dial a pilot number that rings 2-10 different extensions simultaneously. The first extension to answer gets connected to the caller while all other extensions will stop ringing. A timeout value can be set whereas if none of the extensions answer before the timer expires, all the extensions will stop ringing and one final destination number will ring indefinitely instead. The final number could be another voice hunt-group pilot number or mailbox The following features are supported for Voice Hunt-Group:
Calls can be forwarded to Voice Hunt-Group
Calls can be transferred to Voice Hunt-Group
Member of Voice Hunt-Group can be SCCP, ds0-group, pri-group, FXS or SIP phone/trunk
Max member of Voice Hunt-Group will be 32

QUESTION 43
Which Cisco Unified Communications Manager Express ephone button configuration separator enables overflow lines when the primary line for an overlay button is occupied by an active call?

A.    o
B.    c
C.    w
D.    x
E.    :

Answer: D
Explanation:
x expansion/overflow, define additional expansion lines that are used when the primary line for an overlay button is occupied by an active call.

QUESTION 44
Which two statements describe characteristics of Cisco Unified Border Element high availability, prior to Cisco IOS release 15.2.3T, using a box-to-box redundancy configuration? (Choose two.)

A.    It leverages HSRP for router redundancy and GLBP for load sharing between a pair of routers.
B.    Cisco Unified Border Element session information is check-pointed across the active and standby router pair.
C.    It supports media and signal preservation when a switchover occurs.
D.    Only media streams are preserved when a switchover occurs.
E.    It can leverage either HSRP or VRRP for router redundancy.
F.    The SIP media signal must be bound to the loopback interface.

Answer: BD

QUESTION 45
Refer to the exhibit. From this NFAS-enabled T1 PRI configuration on a Cisco IOS router, how many bearer channels are available to carry voice traffic?

451

A.    91
B.    92
C.    93
D.    94
E.    95

Answer: D
Explanation:
In NFAS one channel is used for signaling so according to this we will have 94 channel for with bearer capability.

QUESTION 46
Refer to the exhibit. Assuming this NFAS-enabled T1 PRI configuration on a Cisco IOS router is fully functional, what will the controller T1 1/1 D-channel status be in the output of the show isdn status command?

461

A.    MULTIPLE_FRAME_ESTABLISHED
B.    TEI_ASSIGNED
C.    AWAITING_ESTABLISHMENT
D.    STANDBY
E.    INITIALIZED

Answer: B
Explanation:
TEI_ASSIGNED, which indicates that the PRI does not exchange Layer 2 frames with the switch. Use the show controller t1 x command to first check the controller t1 circuit, and verify whether it is clean (that is, it has no errors) before you troubleshoot ISDN Layer 2 problem with the debug isdn q921.

QUESTION 47
Refer to the exhibit. In an effort to troubleshoot a caller ID delivery problem, a customer emailed you the voice port configuration on a Cisco IOS router. Which type of voice port is it?

471

A.    FXS
B.    E&M
C.    BRI
D.    FXO
E.    DID

Answer: D

QUESTION 48
The iLBC codec operates at 38 bytes per sample per 20-millisecond interval. What is its codec bit rate in kilobits per second?

A.    6.3
B.    13.3
C.    15.2
D.    16
E.    24

Answer: C
Explanation:
The internet Low Bit Rate Codec (iLBC) is designed for narrow band speech and results in a payload bit rate of 13.33 kbits per second for 30-millisecond (ms) frames and 15.20 kbits per second for 20 ms frames. When the codec operates at block lengths of 20 ms, it produces 304 bits per block, which is packetized as defined in RFC 3952. Similarly, for block lengths of 30 ms it produces 400 bits per block, which is packetized as defined in RFC 3952.The iLBC has built-in error correction functionality to provide better performance in networks with higher packet loss

QUESTION 49
Assume 6 bytes for the Layer 2 header, 1 byte for the end-of-frame flag, and a 40-millisecond voice payload, how much bandwidth should be allocated to the strict priority queue for five VoIP calls that use a G.729 codec over a multilink PPP link?

A.    87 kb/s
B.    134 kb/s
C.    102.6 kb/s
D.    77.6 kb/s
E.    71.3 kb/s

Answer: A
Explanation:
Voice payloads are encapsulated by RTP, then by UDP, then by IP. A Layer 2 header of the correct format is applied; the type obviously depends on the link technology in use by each router interface: A single voice call generates two one-way RTP/UDP/IP packet streams. UDP provides multiplexing and checksum capability; RTP provides payload identification, timestamps, and sequence numbering.

QUESTION 50
Assume 20 bytes of voice payload, 6 bytes for the Layer 2 header, 1 byte for the end-of-frame flag, and the IP, UDP, and RTP headers are compressed to 2 bytes, how much bandwidth should be allocated to the strict priority queue for six VoIP calls that use a G.729 codec over a multilink PPP link with cRTP enabled?

A.    80.4 kb/s
B.    91.2 kb/s
C.    78.4 kb/s
D.    69.6 kb/s
E.    62.4 kb/s

Answer: D
Explanation:
Voice payloads are encapsulated by RTP, then by UDP, then by IP. A Layer 2 header of the correct format is applied; the type obviously depends on the link technology in use by each router interface: A single voice call generates two one-way RTP/UDP/IP packet streams. UDP provides multiplexing and checksum capability; RTP provides payload identification, timestamps, and sequence numbering.

400-051 dumps full version (PDF&VCE): https://www.lead2pass.com/400-051.html

Large amount of free 400-051 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDcVpjV1ZNcjVzaW8

[May 2018] Free Lead2pass Cisco 352-001 Dumps VCE Download 510q

Free Lead2pass Cisco 352-001 Exam Questions Download:

https://www.lead2pass.com/352-001.html

QUESTION 31
Refer to the exhibit. Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why?

311

A.    CE1. BGP weight is higher than CE2.
B.    CE2. EBGP administrative distance is lower than RIP.
C.    CE2. The link between CE2 and PE1 has more bandwidth than CE1-to-PE1.
D.    CE1. HSRP on CE1 is in active state.

Answer: A

QUESTION 32
A service provider creates a network design that runs MPLS in its WAN backbone using OSPF as the IGP routing protocol. What would be two effects of additionally implementing MPLS-TE? (Choose two.)

A.    MPLS-TE is required to reroute traffic within less than 1 second in case of a link failure inside the
backbone.
B.    MPLS-TE is required to route different MPLS QoS service classes through different paths.
C.    MPLS-TE and OSPF cannot be used together inside one MPLS network.
D.    MPLS-TE cannot use OSPF for the traffic path calculation.
E.    MPLS-TE is required to create backup paths independently from the IGP.

Answer: BE

QUESTION 33
Which two mechanisms ensure that a network design provides fast path failure detection? (Choose two.)

A.    BFD
B.    fast hello packets
C.    UDLD
D.    IP Cisco Express Forwarding

Answer: AB

QUESTION 34
In which two ways is a network design improved by the inclusion of IP Event Dampening? (Choose two.)

A.    reduces processing load
B.    provides sub-second convergence
C.    improves network stability
D.    prevents routing loops
E.    quickly detects network failures

Answer: AC

QUESTION 35
You are evaluating convergence characteristics of various interior gateway protocols for a new network design. Which technology allows link-state routing protocols to calculate paths to destination prefixes that are functionally similar to feasible successors in Enhanced Interior Gateway Routing Protocol?

A.    Incremental Shortest Path First
B.    Cisco Multiprotocol Label Switching Traffic Engineering Fast Reroute
C.    Loop-Free Alternate Fast Reroute
D.    partial route calculation
E.    Fast-Flooding

Answer: C

QUESTION 36
You are hired to design a solution that will improve network availability for users on a campus network with routed access. If the budget limits you to three components, which three components would you recommend in your design proposal? (Choose three.)

A.    redundant power supplies in the access routers
B.    standby route processors for SSO in the core routers
C.    standby route processors for SSO in the distribution routers
D.    standby route processors for SSO in the access routers
E.    replace copper links between devices with fiber links

Answer: ADE

QUESTION 37
You are designing a network to support data, voice and video. Which two main factors will you address to improve network convergence? (Choose two.)

A.    event propagation delay
B.    failure detection delay
C.    forwarding engine update delay
D.    routing table recalculation delay

Answer: BD

QUESTION 38
Refer to the exhibit. This diagram depicts the design of a small network that will run EIGRP on R1 and R2, and EIGRP Stub on R3. In which two ways will this network be impacted if there is link instability between R1 and R2? (Choose two.)

381

A.    R1 will have routes in its routing table that originate from R2 and R3.
B.    R3 will have routes in its routing table that originate from R1 and R2.
C.    R2 will have routes in its routing table that originate from R1 and R3.
D.    R3 will be transit for traffic between R1 and R2.
E.    R3 will not be transit for traffic between R1 and R2.

Answer: BE

352-001 dumps full version (PDF&VCE): https://www.lead2pass.com/352-001.html

Large amount of free 352-001 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDaUphM0lMOWRjUU0

You may also need:

200-310 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDUE9zeHd2YUFFNUE

300-101 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDbHBiVVk1ZVhpOGc

300-115 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDM0pqaFJWUXVuM2M

300-320 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDUGlzdWdZNHUwZ28

[May 2018] Lead2pass Free 312-50v9 Exam Dumps With PDF And VCE Download 614q

Free Download Lead2pass EC-Council 312-50v9 VCE And PDF Dumps:

https://www.lead2pass.com/312-50v9.html

QUESTION 41
Which type of antenna is used in wireless communication?

A.    Omnidirectional
B.    Parabolic
C.    Uni-directional
D.    Bi-directional Continue reading

[May 2018] Lead2pass 2018 100% Real 312-49v9 Exam Questions 490q

Lead2pass 2018 New EC-Council 312-49v9 Braindump Free Download:

https://www.lead2pass.com/312-49v9.html

QUESTION 71
Data Acquisition is the process of imaging or otherwise obtaining information from a digital device and its peripheral equipment and media

A.    True
B.    False Continue reading

[May 2018] Lead2pass 300-365 Dumps PDF Free Download 71q

Lead2pass Cisco 300-365 Exam Dumps Free Download:

https://www.lead2pass.com/300-365.html

QUESTION 31
Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller?

A.    show ap config general Cisco_AP
B.    show wlan wlan_id
C.    show flexconnect summary
D.    show flexconnect group detail Continue reading

[May 2018] 2018 New Lead2pass Cisco 300-360 Dumps Free Download 147q

2018 New Released Cisco 300-360 Exam Dumps Free Download In Lead2pass:

https://www.lead2pass.com/300-360.html

QUESTION 31
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data. What does this indicate about the signal strength?

A.    The area is below the minimum threshold configured on the tool.
B.    The area is below the detectable level and indicates no RF signal.
C.    The area is below -100 dBm at coverage cell edge.
D.    The area is below -67 dBm at coverage cell edge.

Answer: A

QUESTION 32
An engineer must design wireless coverage in thick-walled stairwells. Which information should the engineer refer to when determining where APs can be installed?

A.    Local or National Building Code
B.    IEEE
C.    BICSI TDMM
D.    Cisco Hardware Installation Guide

Answer: D

QUESTION 33
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. Which of the following is a requirement for the design?

A.    overlapping -72 dBm coverage from two access points
B.    overlapping -67 dBm coverage from two access points
C.    continuous -67 dBm coverage from one access point
D.    continuous -72 dBm coverage from one access point

Answer: C

QUESTION 34
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)

A.    Use APs with external antennas.
B.    Use DoS attack on APs while measuring the throughput.
C.    Use APs with built-in antennas.
D.    Use a battery pack to power APs.
E.    Use a drawing of the office space to draw AP and client placements.
F.    Use APs with directional antennas.

Answer: CDE

QUESTION 35
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?

A.    225 feet
B.    80 feet
C.    150 feet
D.    100 feet

Answer: A

QUESTION 36
Which two options describe best practices that must be completed after a wireless installation is finished? (Choose two.)

A.    Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.
B.    Consult with the customer to ensure that the IT staff has a complete set of design and installationdocuments.
C.    Make sure the customer is aware that they should consider purchasing a support contract immediately afterthe installation is complete.
D.    Spend time with the customer to show them the controller GUI and inform them how they can reach theCisco TAC if they have any problems.
E.    Test all the customer’s wireless devices and applications to ensure they are working properly.

Answer: BE

QUESTION 37
A customer is deploying a Greenfield 802.11ac network on a floor that will support approximately 300 wireless devices. Which setting needs to be changed on Prime Infrastructure Planning Tool in order to predict the amount of access points the customer needs to service the new floor?

A.    Data Coverage Support Margin
B.    Demand Settings
C.    Add AP Field
D.    802.11n Protocol Support

Answer: B
Explanation:
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html#pgfId-1671104

QUESTION 38
What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?

A.    11 Mb/s
B.    36 Mb/s
C.    12 Mb/s
D.    18 Mb/s

Answer: C

QUESTION 39
An engineer is conducting a location readiness test and wants a selected point to be considered location-ready. Which three possible configurations reflect the minimum number of APs needed? (Choose three.)

A.    One AP is resident in each quadrant surrounding the point-in-question.
B.    One AP per 1400 sq. ft. on the map.
C.    Two APs are resident in each quadrant surrounding the point-in- question.
D.    Four APs are deployed on the floor.
E.    Three APs are within 70 feet (21 meters) of the point-in- question
F.    Three APs are deployed on the floor.

Answer: ADE
Explanation:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/CMX/CMX_LocFund.pdf

QUESTION 40
A network engineer is configuring QoS with a DSCP value of 46. To which queue must the CoS be mapped for priority queuing of the voice frames?

A.    1
B.    2
C.    5
D.    4
E.    3

Answer: C

300-360 dumps full version (PDF&VCE): https://www.lead2pass.com/300-360.html

Large amount of free 300-360 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDU1VGRGVieEdJWGM

Maybe you also need:

Large amount of free 300-365 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSnBMTGlieXBLZWs

Large amount of free 300-370 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSTdRZ3dTUjVscVU

Large amount of free 300-375 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDaUxFbEpISnFINk0

[May 2018] 300-320 Exam Questions Free Download From Lead2pass 558q

Best Lead2pass Cisco 300-320 PDF Dumps With New Update Exam Questions:

https://www.lead2pass.com/300-320.html

QUESTION 31
What network technology provides Layer 2 high availability between the access and distribution layers?

A.    HSRP
B.    MEC
C.    EIGRP
D.    GLBP Continue reading

[May 2018] 300-320 Exam Questions Free Download From Lead2pass 558q

Best Lead2pass Cisco 300-320 PDF Dumps With New Update Exam Questions:

https://www.lead2pass.com/300-320.html

QUESTION 31
What network technology provides Layer 2 high availability between the access and distribution layers?

A.    HSRP
B.    MEC
C.    EIGRP
D.    GLBP Continue reading

[May 2018] 100% New Updated 300-210 New Questions Lead2pass Helps Pass 300-210 Exam Successfully 383q

100% Pass 300-210 Exam By Training Lead2pass New VCE And PDF Dumps:

https://www.lead2pass.com/300-210.html

QUESTION 51
Which IPS signature regular expression CLI command matches a host issuing a domain lookup for www.theblock.com?

A.    regex-string (\x03[Tt][Hh][Ee]\x05[Bb][Ll][Oo][Cc][Kk])
B.    regex-string (\x0b[theblock.com])
C.    regex-string (\x03[the]\x05[block]0x3[com])
D.    regex-string (\x03[T][H][E]\x05[B][L][O][C][K]\x03[.][C][O][M] Continue reading

[May 2018] Official 300-209 Exam Preparation Download From Lead2pass 319q

Pass 300-209 Exam By Exercising Lead2pass Latest 300-209 VCE And PDF Dumps:

https://www.lead2pass.com/300-209.html

QUESTION 31
A Cisco IOS SSL VPN gateway is configured to operate in clientless mode so that users can access file shares on a Microsoft Windows 2003 server. Which protocol is used between the Cisco IOS router and the Windows server?

A.    HTTPS
B.    NetBIOS
C.    CIFS
D.    HTTP

Answer: C

QUESTION 32
You are configuring a Cisco IOS SSL VPN gateway to operate with DVTI support. Which command must you configure on the virtual template?

A.    tunnel protection ipsec
B.    ip virtual-reassembly
C.    tunnel mode ipsec
D.    ip unnumbered

Answer: D

QUESTION 33
Which protocol supports high availability in a Cisco IOS SSL VPN environment?

A.    HSRP
B.    VRRP
C.    GLBP
D.    IRDP

Answer: A

QUESTION 34
When you configure IPsec VPN High Availability Enhancements, which technology does Cisco recommend that you enable to make reconvergence faster?

A.    EOT
B.    IP SLAs
C.    periodic IKE keepalives
D.    VPN fast detection

Answer: C

QUESTION 35
Which hash algorithm is required to protect classified information?

A.    MD5
B.    SHA-1
C.    SHA-256
D.    SHA-384

Answer: D

QUESTION 36
Which cryptographic algorithms are approved to protect Top Secret information?

A.    HIPPA DES
B.    AES-128
C.    RC4-128
D.    AES-256

Answer: D

QUESTION 37
Which Cisco firewall platform supports Cisco NGE?

A.    FWSM
B.    Cisco ASA 5505
C.    Cisco ASA 5580
D.    Cisco ASA 5525-X

Answer: D

QUESTION 38
Which algorithm is replaced by elliptic curve cryptography in Cisco NGE?

A.    3DES
B.    AES
C.    DES
D.    RSA

Answer: D

QUESTION 39
Which encryption and authentication algorithms does Cisco recommend when deploying a Cisco NGE supported VPN solution?

A.    AES-GCM and SHA-2
B.    3DES and DH
C.    AES-CBC and SHA-1
D.    3DES and SHA-1

Answer: A

QUESTION 40
An administrator wishes to limit the networks reachable over the Anyconnect VPN tunnels. Which configuration on the ASA will correctly limit the networks reachable to 209.165.201.0/27 and 209.165.202.128/27?

A.    access-list splitlist standard permit 209.165.201.0 255.255.255.224
access-list splitlist standard permit 209.165.202.128 255.255.255.224 !
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value splitlist
B.    access-list splitlist standard permit 209.165.201.0 255.255.255.224
access-list splitlist standard permit 209.165.202.128 255.255.255.224 !
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
split-tunnel-policy tunnelall
split-tunnel-network-list value splitlist
C.    group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list ipv4 1 209.165.201.0 255.255.255.224
split-tunnel-network-list ipv4 2 209.165.202.128 255.255.255.224
D.    access-list splitlist standard permit 209.165.201.0 255.255.255.224
access-list splitlist standard permit 209.165.202.128 255.255.255.224 !
crypto anyconnect vpn-tunnel-policy tunnelspecified
crypto anyconnect vpn-tunnel-network-list splitlist
E.    crypto anyconnect vpn-tunnel-policy tunnelspecified
crypto anyconnect split-tunnel-network-list ipv4 1 209.165.201.0 255.255.255.224
crypto anyconnect split-tunnel-network-list ipv4 2 209.165.202.128 255.255.255.224

Answer: A

300-209 dumps full version (PDF&VCE): https://www.lead2pass.com/300-209.html

Large amount of free 300-209 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDYnF5Vk16OS1tc1E

You may also need:

300-206 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDQ0xqNGttYzZGYk0

300-208 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDMXlWOHdFVkZmREU

300-210 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDRF9kSExjc1FqREU

[May 2018] 300-208 Latest Dumps Free Download From Lead2pass 365q

New Lead2pass 300-208 Dumps PDF Version Released For Free Downloading:

https://www.lead2pass.com/300-208.html

QUESTION 31
Which three components comprise the Cisco ISE profiler? (Choose three.)

A.    the sensor, which contains one or more probes
B.    the probe manager
C.    a monitoring tool that connects to the Cisco ISE
D.    the trigger, which activates ACLs
E.    an analyzer, which uses configured policies to evaluate endpoints
F.    a remitter tool, which fails over to redundant profilers Continue reading