[May 2018] Lead2pass 2018 New Cisco 210-065 Braindump Free Download 354q

Lead2pass 210-065 Exam Questions Guarantee 210-065 Certification Exam 100% Success:

https://www.lead2pass.com/210-065.html

QUESTION 21
Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition?

A.    utils factory reset 2
B.    utils system factory init
C.    xcommand defaultvalues set level: 2
D.    xconfiguration default factory
E.    utils reset factory
F.    xcommand SystemUnit FactoryReset

Answer: B

QUESTION 22
The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?

221

222

223

224

A.    The subnet mask on the codec is incorrect.
B.    The ip address of the codec is incorrect.
C.    The interface that the codec is in is in the wrong VLAN.
D.    The codec did not receive a DHCP address from the DHCP server.

Answer: A
Explanation:
The subnet mask configured on the codec is 255.255.255.128, when it should be 255.255.255.0.

QUESTION 23
Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)

A.    automatic software update and release keys
B.    intelligent call routing engine
C.    provisioning a Cisco TelePresence System endpoint
D.    tracing SIP and H.323 calls
E.    managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager
F.    rebooting endpoints that are registered to the Cisco TelePresence Video Communications
Server

Answer: ABF

QUESTION 24
Refer to the exhibit. Which system tab can be used to add video infrastructure devices and endpoints?

241

A.    Navigator
B.    System Overview
C.    Configuration Templates
D.    Provisioning
E.    Administrative Tools

Answer: A

QUESTION 25
Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch? (Choose two.)

A.    enhanced continuous presence
B.    active speaker switching
C.    continuous presence
D.    speaker switching
E.    room switching
F.    active continuous presence

Answer: DE

QUESTION 26
Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing conference participants to view multiple participants at the same time?

A.    enhanced continuous presence
B.    active speaker
C.    continuous presence
D.    room switching
E.    speaker switching

Answer: A

210-065 dumps full version (PDF&VCE): https://www.lead2pass.com/210-065.html

Large amount of free 210-065 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDTERGM2szMlVfSTQ

You may also need:

210-060 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDN25QVlRta3F0UkE

[May 2018] Free Sharing Of Cisco 210-060 Brain Dumps From Lead2pass 254q

Free Sharing Of Updated 210-060 VCE And PDF Dumps From Lead2pass:

https://www.lead2pass.com/210-060.html

QUESTION 21
An end user is unable to sign into Jabber.
Assuming that network connectivity has been verified, which three settings for the end user should be checked? (Choose three.)

A.    Jabber Advanced Settings
B.    Cisco Unified Communications Manager Service Profile
C.    Cisco Unified Communications Manager User Management
D.    Cisco Unified Presence Server Advanced Settings
E.    Cisco Unified Presence Server Application Listener
F.    Cisco Unified Presence Server System Topology
G.    Jabber Version

Answer: ABC

QUESTION 22
A user reports that when they receive a voicemail on their phone, they do not receive it in their email as well.
Which feature on Cisco Unity Connection should be checked?

A.    Cisco Unified Messaging Service
B.    Enterprise Parameters
C.    Roles
D.    Message Waiting Indicators
E.    Alternate MWI

Answer: A

QUESTION 23
Many users report that there is a delay in receiving MWI notifications for voicemails.
Which two issues can cause this problem? (Choose two.)

A.    The Connection Notifier service has been stopped.
B.    Voicemail ports are not configured for MWI requests.
C.    The MWI functionality for the port groups has been disabled.
D.    Not enough MWI assigned ports are available.
E.    MWIs are in the process of synchronizing with the phone system.

Answer: DE

QUESTION 24
Users report volume issues with recordings in Cisco Unity Connection.
Which feature can be disabled to prohibit automatic volume adjustments to recordings?

A.    AGC
B.    Noise Reduction
C.    Audio Normalization
D.    VAD

Answer: A

QUESTION 25
Which option allows an engineer to deploy new firmware to a single phone, while reducing possible impact?

A.    Define a new firmware load on specific device. Save configuration and reset individual device.
B.    Define load in device defaults. Reset Device Pool.
C.    Upload firmware to TFTP server. Restart TFTP service.
D.    Enable Peer Firmware Sharing.

Answer: A

QUESTION 26
Which two layers are Cisco Unified Communications component layers? (Choose two.)

A.    Infrastructure layer
B.    Data link layer
C.    Network layer
D.    Endpoints layer
E.    Transport layer

Answer: AD

QUESTION 27
Which three choices are functions or features of Cisco Unity Connection? (Choose three.)

A.    video-enabled messaging through converged networks
B.    text-to-speech, which allows access to Exchange emails from a telephone
C.    voice-enabled message navigation
D.    voice-enabled dialing to external users
E.    automated attendant capabilities
F.    automated call rerouting to agents through round robin, longest idle, or broadcast

Answer: BCE

QUESTION 28
An SCCP IP phone places a call to a SIP phone that is registered to the same Cisco Unified Communications Manager Express.
During the active call, call waiting indicates a second call is incoming to the handset, but the user decides to ignore it.
In this scenario, what is the combined total number of signaling conversations and media flows that used the SCCP phone as an endpoint?

A.    2
B.    3
C.    4
D.    5
E.    6

Answer: B

QUESTION 29
Which port is the default port for SCCP call signaling on Cisco Unified Communications Manager?

A.    2000
B.    2443
C.    5060
D.    5061

Answer: A

QUESTION 30
Which three choices are required for the boot process for a Cisco IP phone? (Choose three.)

A.    TFTP services
B.    DHCP services
C.    Voice VLAN
D.    Routing protocol
E.    TCP/IP
F.    PortFast

Answer: ABC

210-060 dumps full version (PDF&VCE): https://www.lead2pass.com/210-060.html

Large amount of free 210-060 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDN25QVlRta3F0UkE

You may also need:

210-065 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDTERGM2szMlVfSTQ

[May 2018] Free Lead2pass Cisco 200-355 PDF Dumps With The Latest Update Exam Questions 513q

Free Lead2pass Cisco 200-355 PDF Exam Questions And Answers Download:

https://www.lead2pass.com/200-355.html

QUESTION 31
After installing a Cisco 5508 Wireless Controller using the default settings, how often will the RRM update occur?

A.    30 seconds
B.    60 seconds
C.    300 seconds
D.    600 seconds
E.    3600 seconds
F.    7200 seconds Continue reading

[May 2018] Easily Pass 200-310 Exam By Training Lead2pass Latest VCE Dumps 608q

Easily Pass 200-310 Exam By Training Lead2pass New Cisco VCE Dumps:

https://www.lead2pass.com/200-310.html

QUESTION 31
WAN backup over the Internet is often used to provide primary connection redundancy.
Which is the most important consideration when passing corporate traffic over the public Internet?

A.    security
B.    static versus dynamic routing
C.    bandwidth
D.    QoS
E.    latency Continue reading

[May 2018] 2018 Latest Updated 200-155 Dumps Free Download In Lead2pass 164q

2018 Cisco 200-155 Dumps Free Download 100% Pass Promised By Lead2pass:

https://www.lead2pass.com/200-155.html

QUESTION 31
Drag and Drop Question
Drag the WAAS component feature on the left to the corresponding function on the right. Continue reading

[May 2018] Free Lead2pass 200-150 PDF Guarantee 100% Get 200-150 Certification 128q

Free Lead2pass Cisco 200-150 PDF Dumps With New Update Exam Questions:

https://www.lead2pass.com/200-150.html

QUESTION 31
What is the minimum number of fabric modules that should be installed in the Cisco Ne*js 7000 chassis for N 1 redundancy using Ml-Series line card?

A.    3
B.    4
C.    5
D.    6

Answer: A

QUESTION 32
Which address and subnet combination is valid for a host assignment?

A.    172.23.175.210/15
B.    10.100.74.127/25
C.    192.168.73.223/29
D.    10.230.33.15/28

Answer: B

QUESTION 33
Refer to the exhibit. What two conclusions can be mode based upon the output? (Choose two.)

331

A.    regular fromat WWNs are being used
B.    the command show flogl database was run
C.    the command show fcns database vsan 1 was run
D.    registered name formate WWNs are being used
E.    extended format WWNs are being used.

Answer: BE

QUESTION 34
A customer requires two separate physical pathways between multiple initiators and multiple targets.
Which technology meets this requirement on a single Cisco MDS9148 switch?

A.    zoning
B.    port security
C.    LUN masking
D.    VSANs

Answer: D

QUESTION 35
Which device does a network engineer use to break the network environment into smaller collision domains?

A.    switch
B.    router
C.    hub
D.    repeater
E.    CSU/DSU

Answer: A

QUESTION 36
An engineer must copy a new configuration to a Cisco Nexus 7010 Switch from a TFTP server.
Which two commands should be used to retain the configuration after a reboot? (Choose two.)

A.    write memory
B.    copy running-config startup-config
C.    copy tftp://10.10.1.1/my-config running-config
D.    copy tftp://10.10.1.1/my-config startup-config
E.    write erase

Answer: BC

QUESTION 37
At which layer of the OSI Model is TCP traffic encapsulated?

A.    transport
B.    data-link
C.    presentation
D.    application

Answer: A

QUESTION 38
Which two hosts are part of subnet 172.16.160.0/20? (Choose two.)

A.    172.16.168.0
B.    172.16.176.1
C.    172.16.160.255
D.    172.16.160.0
E.    172.16.176.255

Answer: AC

QUESTION 39
Which command should be used to determine which hosts are Fibre Channel targets?

A.    MDS-A# show host database
B.    MDS-A# show flogi database
C.    MDS-A# show fens database
D.    MDS-A# show host-id

Answer: C

QUESTION 40
Which two options are benefits of deploying FCoE beyond the access layer?

A.    higher throughput compared to native Fibre Channel switches.
B.    FCoE cannot be deployed beyond the access layer.
C.    reduction in equipment requirements.
D.    improved security compared to traditional Fibre Channel.
E.    increased application support.

Answer: AC

200-150 dumps full version (PDF&VCE): https://www.lead2pass.com/200-150.html

Large amount of free 200-150 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDbUFVZERzemRpeEU

You may also need:

200-155 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDVFhnSlh5MURJTjQ

[May 2018] New Lead2pass Cisco 200-125 New Questions Free Download 931q

New Released Exam 200-125 PDF Free From the Lead2pass:

https://www.lead2pass.com/200-125.html

QUESTION 41
Refer to the topology shown in the exhibit. Which ports will be STP designated ports if all the links are operating at the same bandwidth? (Choose three.) Continue reading

[May 2018] Lead2pass Offering New 200-105 Exam PDF And 200-105 Exam VCE Dumps For Free Downloading 497q

Official 200-105 Exam Preparation Download From Lead2pass:

https://www.lead2pass.com/200-105.html

QUESTION 41
Which type of topology is required by DMVPN?

A.    ring
B.    full mesh
C.    hub-and-spoke
D.    partial mesh Continue reading

[May 2018] Updated Lead2pass Cisco 100-105 Braindump Free Download 553q

100% Free Lead2pass 100-105 New Questions Download:

https://www.lead2pass.com/100-105.html

QUESTION 41
Which one of the following IP addresses is the last valid host in the subnet using mask 255.255.255.224?

A.    192.168.2.63
B.    192.168.2.62
C.    192.168.2.61
D.    192.168.2.60
E.    192.168.2.32 Continue reading

[May 2018] New Lead2pass 70-765 Dumps PDF Version Released For Free Downloading 155q

New Lead2pass Microsoft 70-765 New Questions Free Download:

https://www.lead2pass.com/70-765.html

QUESTION 51
You administer a Microsoft SQL Server 2012 database.
The database contains a Product table created by using the following definition:

511

You need to ensure that the minimum amount of disk space is used to store the data in the Product table.
What should you do?

A.    Convert all indexes to Column Store indexes.
B.    Implement Unicode Compression.
C.    Implement row-level compression.
D.    Implement page-level compression.

Answer: D
Explanation:
Incorrect Answers:
A: Only a single index is used.
B: Unicode compression supports the fixed-length nchar(n) and nvarchar(n) data types.
C: Row-level compression does not affect VARCHAR och CHAR columns.
https://docs.microsoft.com/en-us/sql/relational-databases/data-compression/data-compression
https://docs.microsoft.com/en-us/sql/relational-databases/data-compression/page-compression-implementation
https://docs.microsoft.com/en-us/sql/relational-databases/data-compression/row-compression-implementation

QUESTION 52
You administer a Microsoft SQL Server 2012 instance.
After a routine shutdown, the drive that contains tempdb fails.
You need to be able to start the SQL Server.
What should you do?

A.    Modify tempdb location in startup parameters.
B.    Start SQL Server in minimal configuration mode.
C.    Start SQL Server in single-user mode.
D.    Configure SQL Server to bypass Windows application logging.

Answer: B
Explanation:
If you have configuration problems that prevent the server from starting, you can start an instance of Microsoft SQL Server by using the minimal configuration startup option.
When you start an instance of SQL Server in minimal configuration mode, note the following:
Only a single user can connect, and the CHECKPOINT process is not executed.
Remote access and read-ahead are disabled.
Startup stored procedures do not run.
tempdb is configured at the smallest possible size.
https://docs.microsoft.com/en-us/sql/database-engine/configure-windows/start-sql-server-with-minimal-configuration

QUESTION 53
You administer a single server that contains a Microsoft SQL Server 2012 default instance.
You plan to install a new application that requires the deployment of a database on the server. The application login requires sysadmin permissions.
You need to ensure that the application login is unable to access other production databases.
What should you do?

A.    Use the SQL Server default instance and configure an affinity mask.
B.    Install a new named SQL Server instance on the server.
C.    Use the SQL Server default instance and enable Contained Databases.
D.    Install a new default SQL Server instance on the server.

Answer: B
Explanation:
https://docs.microsoft.com/en-us/sql/sql-server/install/work-with-multiple-versions-and-instances-of-sql-server

QUESTION 54
You administer a Microsoft SQL Server 2012 Enterprise Edition server that uses 64 cores.
You discover performance issues when large amounts of data are written to tables under heavy system load.
You need to limit the number of cores that handle I/O.
What should you configure?

A.    Processor affinity
B.    Lightweight pooling
C.    Max worker threads
D.    I/O affinity

Answer: D
Explanation:
The affinity Input-Output (I/O) mask Server Configuration Option.
To carry out multitasking, Microsoft Windows 2000 and Windows Server 2003 sometimes move process threads among different processors. Although efficient from an operating system point of view, this activity can reduce Microsoft SQL Server performance under heavy system loads, as each processor cache is repeatedly reloaded with data. Assigning processors to specific threads can improve performance under these conditions by eliminating processor reloads; such an association between a thread and a processor is called processor affinity.
http://msdn.microsoft.com/en-us/library/ms189629.aspx

QUESTION 55
You administer a Microsoft SQL Server 2012 instance that contains a financial database hosted on a storage area network (SAN).
The financial database has the following characteristics:

– A data file of 2 terabytes is located on a dedicated LUN (drive D).
– A transaction log of 10 GB is located on a dedicated LUN (drive E).
– Drive D has 1 terabyte of free disk space.
– Drive E has 5 GB of free disk space.

The database is continually modified by users during business hours from Monday through Friday between 09:00 hours and 17:00 hours. Five percent of the existing data is modified each day.
The Finance department loads large CSV files into a number of tables each business day at 11:15 hours and 15:15 hours by using the BCP or BULK INSERT commands. Each data load adds 3 GB of data to the database.
These data load operations must occur in the minimum amount of time.
A full database backup is performed every Sunday at 10:00 hours. Backup operations will be performed every two hours (11:00, 13:00, 15:00, and 17:00) during business hours.
You need to ensure that your backup will continue if any invalid checksum is encountered.
Which backup option should you use?

A.    STANDBY
B.    Differential
C.    FULL
D.    CHECKSUM
E.    BULK_LOGGED
F.    CONTINUE_AFTER_ERROR
G.    SIMPLE
H.    DBO_ONLY
I.    COPY_ONLY
J.    SKIP
K.    RESTART
L.    Transaction log
M.    NO_CHECKSUM
N.    NORECOVERY

Answer: F
Explanation:
The CONTINUE_AFTER_ERROR option, of the Transact-SQL BACKUP command, instructs BACKUP to continue despite encountering errors such as invalid checksums or torn pages.
https://docs.microsoft.com/en-us/sql/t-sql/statements/backup-transact-sql

QUESTION 56
You administer a Microsoft SQL Server 2012 instance that contains a financial database hosted on a storage area network (SAN).
The financial database has the following characteristics:

– A data file of 2 terabytes is located on a dedicated LUN (drive D).
– A transaction log of 10 GB is located on a dedicated LUN (drive E).
– Drive D has 1 terabyte of free disk space.
– Drive E has 5 GB of free disk space.

The database is continually modified by users during business hours from Monday through Friday between 09:00 hours and 17:00 hours. Five percent of the existing data is modified each day.
The Finance department loads large CSV files into a number of tables each business day at 11:15 hours and 15:15 hours by using the BCP or BULK INSERT commands. Each data load adds 3 GB of data to the database.
These data load operations must occur in the minimum amount of time.
A full database backup is performed every Sunday at 10:00 hours. Backup operations will be performed every two hours (11:00, 13:00, 15:00, and 17:00) during business hours.
On Wednesday at 10:00 hours, the development team requests you to refresh the database on a development server by using the most recent version.
You need to perform a full database backup that will be restored on the development server.
Which backup option should you use?

A.    NORECOVERY
B.    FULL
C.    NO_CHECKSUM
D.    CHECKSUM
E.    Differential
F.    BULK_LOGGED
G.    STANDBY
H.    RESTART
I.    SKIP
J.    Transaction log
K.    DBO ONLY
L.    COPY_ONLY
M.    SIMPLE
N.    CONTINUE AFTER ERROR

Answer: L
Explanation:
COPY_ONLY specifies that the backup is a copy-only backup, which does not affect the normal sequence of backups. A copy-only backup is created independently of your regularly scheduled, conventional backups. A copy-only backup does not affect your overall backup and restore procedures for the database.
https://docs.microsoft.com/en-us/sql/t-sql/statements/backup-transact-sql

QUESTION 57
You administer a Microsoft SQL Server 2012 instance that contains a financial database hosted on a storage area network (SAN).
The financial database has the following characteristics:

– A data file of 2 terabytes is located on a dedicated LUN (drive D).
– A transaction log of 10 GB is located on a dedicated LUN (drive E).
– Drive D has 1 terabyte of free disk space.
– Drive E has 5 GB of free disk space.

The database is continually modified by users during business hours from Monday through Friday between 09:00 hours and 17:00 hours. Five percent of the existing data is modified each day.
The Finance department loads large CSV files into a number of tables each business day at 11:15 hours and 15:15 hours by using the BCP or BULK INSERT commands. Each data load adds 3 GB of data to the database.
These data load operations must occur in the minimum amount of time.
A full database backup is performed every Sunday at 10:00 hours. Backup operations will be performed every two hours (11:00, 13:00, 15:00, and 17:00) during business hours.
You need to ensure that the minimum amount of data is lost.
Which recovery model should the database use?

A.    NORECOVERY
B.    FULL
C.    NO_CHECKSUM
D.    CHECKSUM
E.    Differential
F.    BULK_LOGGED
G.    STANDBY
H.    RESTART
I.    SKIP
J.    Transaction log
K.    DBO ONLY
L.    COPY_ONLY
M.    SIMPLE
N.    CONTINUE AFTER ERROR

Answer: B
Explanation:
The full recovery model requires log backups. No work is lost due to a lost or damaged data file. Can recover to a specific point in time, assuming that your backups are complete up to that point in time.
Incorrect Answers:
F: The bulk logged recovery model can recover to the end of any backup. Point-in-time recovery is not supported.
M: The simple recovery model can recover only to the end of a backup.
https://docs.microsoft.com/en-us/sql/relational-databases/backup-restore/recovery-models-sql-server

QUESTION 58
You administer a Microsoft SQL Server 2012 instance that contains a financial database hosted on a storage area network (SAN).
The financial database has the following characteristics:

– A data file of 2 terabytes is located on a dedicated LUN (drive D).
– A transaction log of 10 GB is located on a dedicated LUN (drive E).
– Drive D has 1 terabyte of free disk space.
– Drive E has 5 GB of free disk space.

The database is continually modified by users during business hours from Monday through Friday between 09:00 hours and 17:00 hours. Five percent of the existing data is modified each day.
The Finance department loads large CSV files into a number of tables each business day at 11:15 hours and 15:15 hours by using the BCP or BULK INSERT commands. Each data load adds 3 GB of data to the database.
These data load operations must occur in the minimum amount of time.
A full database backup is performed every Sunday at 10:00 hours. Backup operations will be performed every two hours (11:00, 13:00, 15:00, and 17:00) during business hours.
You need to ensure that the backup size is as small as possible.
Which backup should you perform every two hours?

A.    NORECOVERY
B.    FULL
C.    NO_CHECKSUM
D.    CHECKSUM
E.    Differential
F.    BULK_LOGGED
G.    STANDBY
H.    RESTART
I.    SKIP
J.    Transaction log
K.    DBO ONLY
L.    COPY_ONLY
M.    SIMPLE
N.    CONTINUE AFTER ERROR

Answer: J
Explanation:
Minimally, you must have created at least one full backup before you can create any log backups. After that, the transaction log can be backed up at any time unless the log is already being backed up.
https://docs.microsoft.com/en-us/sql/relational-databases/backup-restore/transaction-log-backups-sql-server

70-765 dumps full version (PDF&VCE): https://www.lead2pass.com/70-765.html

Large amount of free 70-765 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDejczeWp0aURaSnM

You may also need:

70-761 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDU2RSQnhzX2pIZVE

70-762 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDMW9NcjJrQXlsMGs

70-764 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDUjBoM0pVQnlUTlU

70-767 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdTF0R0taLWgxSmc

70-768 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDZ2pRQkV6Vnc4dHc

[May 2018] Easily Pass 70-764 Exam By Training Lead2pass New Microsoft VCE Dumps 332q

Easily Pass 70-764 Exam With Lead2pass New 70-764 VCE And PDF Dumps:

https://www.lead2pass.com/70-764.html

QUESTION 81
You administer a Microsoft SQL Server 2016 database named Orders.
Users report that during peak usage periods, certain operations are taking more time than expected.
Your initial analysis suggests that blocking is the cause.
You need to gather more data to be able to determine which processes are being blocked and to identify the root cause.
What should you do?

A.    Start a trace using SQL Server Profiler to catch the Lock: Deadlock event.
B.    Use sp_configure to set the blocked process threshold. Start a trace using SQL Server Profiler to catch the Blocked Process Report event.
C.    Schedule a SQL Agent job to run every 60 seconds and insert the results of executing the sys.dm_os_wait_stats DMV into a table.
D.    Use System Monitor to catch the Lock Waits/sec event.

Continue reading

[May 2018] 2018 Updated Lead2pass Microsoft 70-744 Exam Questions 160q

70-744 Exam Dumps Free Download In Lead2pass 100% 70-744 Exam Questions:

https://www.lead2pass.com/70-744.html

QUESTION 51
The New-CIPolicy cmdlet creates a Code Integrity policy as an .xml file. If you do NOT supply either driver files or rules what will happen?

A.    The cmdlet performs a system scan
B.    An exception/warning is shown because either one is required
C.    Nothing
D.    The cmdlet searches the Code Integrity Audit log for drivers

Continue reading